gpgme-1.23.2-4.fc41
List of Defects
Error: COMPILER_WARNING (CWE-457): [#def1]
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c:3918:10: warning[-Wmaybe-uninitialized]: ‘arg2’ may be used uninitialized
# 3918 | *obj = value;
# | ~~~~~^~~~~~~
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c: scope_hint: In function ‘_wrap_gpgme_error_t_p_assign’
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c:48217:17: note: ‘arg2’ was declared here
#48217 | gpgme_error_t arg2 ;
# | ^~~~
# 3916|
# 3917| static void gpgme_error_t_p_assign(gpgme_error_t *obj, gpgme_error_t value) {
# 3918|-> *obj = value;
# 3919| }
# 3920|
Error: COMPILER_WARNING (CWE-457): [#def2]
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c: scope_hint: In function ‘_wrap_gpgme_data_seek’
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c:4116:14: warning[-Wmaybe-uninitialized]: ‘arg2’ may be used uninitialized
# 4116 | result = gpgme_data_seek(arg1,arg2,arg3);
# | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c:4077:9: note: ‘arg2’ was declared here
# 4077 | off_t arg2 ;
# | ^~~~
# 4114| {
# 4115| SWIG_PYTHON_THREAD_BEGIN_ALLOW;
# 4116|-> result = gpgme_data_seek(arg1,arg2,arg3);
# 4117| SWIG_PYTHON_THREAD_END_ALLOW;
# 4118| }
Error: COMPILER_WARNING (CWE-457): [#def3]
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c: scope_hint: In function ‘_wrap_gpgme_strerror’
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c:4676:22: warning[-Wmaybe-uninitialized]: ‘arg1’ may be used uninitialized
# 4676 | result = (char *)gpgme_strerror(arg1);
# | ^~~~~~~~~~~~~~~~~~~~
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c:4657:17: note: ‘arg1’ was declared here
# 4657 | gpgme_error_t arg1 ;
# | ^~~~
# 4674| {
# 4675| SWIG_PYTHON_THREAD_BEGIN_ALLOW;
# 4676|-> result = (char *)gpgme_strerror(arg1);
# 4677| SWIG_PYTHON_THREAD_END_ALLOW;
# 4678| }
Error: COMPILER_WARNING (CWE-457): [#def4]
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c: scope_hint: In function ‘_wrap_gpgme_strerror_r’
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c:4731:14: warning[-Wmaybe-uninitialized]: ‘arg1’ may be used uninitialized
# 4731 | result = (int)gpgme_strerror_r(arg1,arg2,arg3);
# | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c:4688:15: note: ‘arg1’ was declared here
# 4688 | gpg_error_t arg1 ;
# | ^~~~
# 4729| {
# 4730| SWIG_PYTHON_THREAD_BEGIN_ALLOW;
# 4731|-> result = (int)gpgme_strerror_r(arg1,arg2,arg3);
# 4732| SWIG_PYTHON_THREAD_END_ALLOW;
# 4733| }
Error: COMPILER_WARNING (CWE-457): [#def5]
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c: scope_hint: In function ‘_wrap_gpgme_strsource’
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c:4772:22: warning[-Wmaybe-uninitialized]: ‘arg1’ may be used uninitialized
# 4772 | result = (char *)gpgme_strsource(arg1);
# | ^~~~~~~~~~~~~~~~~~~~~
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c:4753:17: note: ‘arg1’ was declared here
# 4753 | gpgme_error_t arg1 ;
# | ^~~~
# 4770| {
# 4771| SWIG_PYTHON_THREAD_BEGIN_ALLOW;
# 4772|-> result = (char *)gpgme_strsource(arg1);
# 4773| SWIG_PYTHON_THREAD_END_ALLOW;
# 4774| }
Error: COMPILER_WARNING (CWE-457): [#def6]
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c: scope_hint: In function ‘_wrap_gpgme_err_code_to_errno’
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c:4833:14: warning[-Wmaybe-uninitialized]: ‘arg1’ may be used uninitialized
# 4833 | result = (int)gpgme_err_code_to_errno(arg1);
# | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c:4814:20: note: ‘arg1’ was declared here
# 4814 | gpgme_err_code_t arg1 ;
# | ^~~~
# 4831| {
# 4832| SWIG_PYTHON_THREAD_BEGIN_ALLOW;
# 4833|-> result = (int)gpgme_err_code_to_errno(arg1);
# 4834| SWIG_PYTHON_THREAD_END_ALLOW;
# 4835| }
Error: COMPILER_WARNING (CWE-457): [#def7]
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c: scope_hint: In function ‘_wrap_gpgme_err_make_from_errno’
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c:4918:14: warning[-Wmaybe-uninitialized]: ‘arg1’ may be used uninitialized
# 4918 | result = gpgme_err_make_from_errno(arg1,arg2);
# | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c:4892:22: note: ‘arg1’ was declared here
# 4892 | gpgme_err_source_t arg1 ;
# | ^~~~
# 4916| {
# 4917| SWIG_PYTHON_THREAD_BEGIN_ALLOW;
# 4918|-> result = gpgme_err_make_from_errno(arg1,arg2);
# 4919| SWIG_PYTHON_THREAD_END_ALLOW;
# 4920| }
Error: COMPILER_WARNING (CWE-457): [#def8]
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c: scope_hint: In function ‘_wrap__gpgme_key_sig_status_set’
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c:8660:30: warning[-Wmaybe-uninitialized]: ‘arg2’ may be used uninitialized
# 8660 | if (arg1) (arg1)->status = arg2;
# | ~~~~~~~~~~~~~~~^~~~~~
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c:8636:17: note: ‘arg2’ was declared here
# 8636 | gpgme_error_t arg2 ;
# | ^~~~
# 8658| {
# 8659| SWIG_PYTHON_THREAD_BEGIN_ALLOW;
# 8660|-> if (arg1) (arg1)->status = arg2;
# 8661| SWIG_PYTHON_THREAD_END_ALLOW;
# 8662| }
Error: COMPILER_WARNING (CWE-457): [#def9]
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c: scope_hint: In function ‘_wrap__gpgme_invalid_key_reason_set’
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c:12495:30: warning[-Wmaybe-uninitialized]: ‘arg2’ may be used uninitialized
#12495 | if (arg1) (arg1)->reason = arg2;
# | ~~~~~~~~~~~~~~~^~~~~~
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c:12471:17: note: ‘arg2’ was declared here
#12471 | gpgme_error_t arg2 ;
# | ^~~~
#12493| {
#12494| SWIG_PYTHON_THREAD_BEGIN_ALLOW;
#12495|-> if (arg1) (arg1)->reason = arg2;
#12496| SWIG_PYTHON_THREAD_END_ALLOW;
#12497| }
Error: COMPILER_WARNING (CWE-457): [#def10]
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c: scope_hint: In function ‘_wrap_gpgme_io_event_done_data_err_set’
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c:14171:27: warning[-Wmaybe-uninitialized]: ‘arg2’ may be used uninitialized
#14171 | if (arg1) (arg1)->err = arg2;
# | ~~~~~~~~~~~~^~~~~~
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c:14147:17: note: ‘arg2’ was declared here
#14147 | gpgme_error_t arg2 ;
# | ^~~~
#14169| {
#14170| SWIG_PYTHON_THREAD_BEGIN_ALLOW;
#14171|-> if (arg1) (arg1)->err = arg2;
#14172| SWIG_PYTHON_THREAD_END_ALLOW;
#14173| }
Error: COMPILER_WARNING (CWE-457): [#def11]
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c: scope_hint: In function ‘_wrap_gpgme_io_event_done_data_op_err_set’
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c:14238:30: warning[-Wmaybe-uninitialized]: ‘arg2’ may be used uninitialized
#14238 | if (arg1) (arg1)->op_err = arg2;
# | ~~~~~~~~~~~~~~~^~~~~~
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c:14214:17: note: ‘arg2’ was declared here
#14214 | gpgme_error_t arg2 ;
# | ^~~~
#14236| {
#14237| SWIG_PYTHON_THREAD_BEGIN_ALLOW;
#14238|-> if (arg1) (arg1)->op_err = arg2;
#14239| SWIG_PYTHON_THREAD_END_ALLOW;
#14240| }
Error: COMPILER_WARNING (CWE-457): [#def12]
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c: scope_hint: In function ‘_wrap_gpgme_data_new_from_filepart’
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c:16227:14: warning[-Wmaybe-uninitialized]: ‘arg4’ may be used uninitialized
#16227 | result = gpgme_data_new_from_filepart(arg1,(char const *)arg2,arg3,arg4,arg5);
# | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c:16163:9: note: ‘arg4’ was declared here
#16163 | off_t arg4 ;
# | ^~~~
#16225| {
#16226| SWIG_PYTHON_THREAD_BEGIN_ALLOW;
#16227|-> result = gpgme_data_new_from_filepart(arg1,(char const *)arg2,arg3,arg4,arg5);
#16228| SWIG_PYTHON_THREAD_END_ALLOW;
#16229| }
Error: COMPILER_WARNING (CWE-457): [#def13]
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c: scope_hint: In function ‘_wrap__gpgme_recipient_status_set’
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c:21153:30: warning[-Wmaybe-uninitialized]: ‘arg2’ may be used uninitialized
#21153 | if (arg1) (arg1)->status = arg2;
# | ~~~~~~~~~~~~~~~^~~~~~
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c:21129:17: note: ‘arg2’ was declared here
#21129 | gpgme_error_t arg2 ;
# | ^~~~
#21151| {
#21152| SWIG_PYTHON_THREAD_BEGIN_ALLOW;
#21153|-> if (arg1) (arg1)->status = arg2;
#21154| SWIG_PYTHON_THREAD_END_ALLOW;
#21155| }
Error: COMPILER_WARNING (CWE-457): [#def14]
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c: scope_hint: In function ‘_wrap__gpgme_signature_status_set’
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c:26782:30: warning[-Wmaybe-uninitialized]: ‘arg2’ may be used uninitialized
#26782 | if (arg1) (arg1)->status = arg2;
# | ~~~~~~~~~~~~~~~^~~~~~
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c:26758:17: note: ‘arg2’ was declared here
#26758 | gpgme_error_t arg2 ;
# | ^~~~
#26780| {
#26781| SWIG_PYTHON_THREAD_BEGIN_ALLOW;
#26782|-> if (arg1) (arg1)->status = arg2;
#26783| SWIG_PYTHON_THREAD_END_ALLOW;
#26784| }
Error: COMPILER_WARNING (CWE-457): [#def15]
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c: scope_hint: In function ‘_wrap__gpgme_signature_validity_reason_set’
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c:27419:39: warning[-Wmaybe-uninitialized]: ‘arg2’ may be used uninitialized
#27419 | if (arg1) (arg1)->validity_reason = arg2;
# | ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c:27395:17: note: ‘arg2’ was declared here
#27395 | gpgme_error_t arg2 ;
# | ^~~~
#27417| {
#27418| SWIG_PYTHON_THREAD_BEGIN_ALLOW;
#27419|-> if (arg1) (arg1)->validity_reason = arg2;
#27420| SWIG_PYTHON_THREAD_END_ALLOW;
#27421| }
Error: COMPILER_WARNING (CWE-457): [#def16]
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c: scope_hint: In function ‘_wrap__gpgme_import_status_result_set’
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c:31025:30: warning[-Wmaybe-uninitialized]: ‘arg2’ may be used uninitialized
#31025 | if (arg1) (arg1)->result = arg2;
# | ~~~~~~~~~~~~~~~^~~~~~
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c:31001:17: note: ‘arg2’ was declared here
#31001 | gpgme_error_t arg2 ;
# | ^~~~
#31023| {
#31024| SWIG_PYTHON_THREAD_BEGIN_ALLOW;
#31025|-> if (arg1) (arg1)->result = arg2;
#31026| SWIG_PYTHON_THREAD_END_ALLOW;
#31027| }
Error: COMPILER_WARNING (CWE-457): [#def17]
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c: scope_hint: In function ‘_wrap_gpgme_op_receive_keys_start’
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c:32996:19: warning[-Wmaybe-uninitialized]: ‘size2’ may be used uninitialized
#32996 | for (i = 0; i < size2; i++)
# | ~~^~~~~~~
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c:32924:10: note: ‘size2’ was declared here
#32924 | size_t size2 ;
# | ^~~~~
#32994| size_t i;
#32995| free(vector2);
#32996|-> for (i = 0; i < size2; i++)
#32997| Py_XDECREF(pyVector2[i]);
#32998| }
Error: COMPILER_WARNING (CWE-457): [#def18]
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c: scope_hint: In function ‘_wrap_gpgme_op_receive_keys’
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c:33082:19: warning[-Wmaybe-uninitialized]: ‘size2’ may be used uninitialized
#33082 | for (i = 0; i < size2; i++)
# | ~~^~~~~~~
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c:33010:10: note: ‘size2’ was declared here
#33010 | size_t size2 ;
# | ^~~~~
#33080| size_t i;
#33081| free(vector2);
#33082|-> for (i = 0; i < size2; i++)
#33083| Py_XDECREF(pyVector2[i]);
#33084| }
Error: COMPILER_WARNING (CWE-457): [#def19]
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c: scope_hint: In function ‘_wrap_gpgme_op_export_ext_start’
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c:33875:19: warning[-Wmaybe-uninitialized]: ‘size2’ may be used uninitialized
#33875 | for (i = 0; i < size2; i++)
# | ~~^~~~~~~
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c:33670:10: note: ‘size2’ was declared here
#33670 | size_t size2 ;
# | ^~~~~
#33873| size_t i;
#33874| free(vector2);
#33875|-> for (i = 0; i < size2; i++)
#33876| Py_XDECREF(pyVector2[i]);
#33877| }
Error: COMPILER_WARNING (CWE-457): [#def20]
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c: scope_hint: In function ‘_wrap_gpgme_op_export_ext’
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c:34191:19: warning[-Wmaybe-uninitialized]: ‘size2’ may be used uninitialized
#34191 | for (i = 0; i < size2; i++)
# | ~~^~~~~~~
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c:33986:10: note: ‘size2’ was declared here
#33986 | size_t size2 ;
# | ^~~~~
#34189| size_t i;
#34190| free(vector2);
#34191|-> for (i = 0; i < size2; i++)
#34192| Py_XDECREF(pyVector2[i]);
#34193| }
Error: COMPILER_WARNING (CWE-457): [#def21]
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c: scope_hint: In function ‘_wrap_gpgme_op_keylist_ext_start’
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c:39399:19: warning[-Wmaybe-uninitialized]: ‘size2’ may be used uninitialized
#39399 | for (i = 0; i < size2; i++)
# | ~~^~~~~~~
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c:39313:10: note: ‘size2’ was declared here
#39313 | size_t size2 ;
# | ^~~~~
#39397| size_t i;
#39398| free(vector2);
#39399|-> for (i = 0; i < size2; i++)
#39400| Py_XDECREF(pyVector2[i]);
#39401| }
Error: COMPILER_WARNING (CWE-457): [#def22]
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c: scope_hint: In function ‘_wrap_gpgme_op_spawn_start’
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c:40968:19: warning[-Wmaybe-uninitialized]: ‘size3’ may be used uninitialized
#40968 | for (i = 0; i < size3; i++)
# | ~~^~~~~~~
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c:40843:10: note: ‘size3’ was declared here
#40843 | size_t size3 ;
# | ^~~~~
#40966| size_t i;
#40967| free(vector3);
#40968|-> for (i = 0; i < size3; i++)
#40969| Py_XDECREF(pyVector3[i]);
#40970| }
Error: COMPILER_WARNING (CWE-457): [#def23]
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c: scope_hint: In function ‘_wrap_gpgme_op_spawn’
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c:41113:19: warning[-Wmaybe-uninitialized]: ‘size3’ may be used uninitialized
#41113 | for (i = 0; i < size3; i++)
# | ~~^~~~~~~
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c:40988:10: note: ‘size3’ was declared here
#40988 | size_t size3 ;
# | ^~~~~
#41111| size_t i;
#41112| free(vector3);
#41113|-> for (i = 0; i < size3; i++)
#41114| Py_XDECREF(pyVector3[i]);
#41115| }
Error: COMPILER_WARNING (CWE-457): [#def24]
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c: scope_hint: In function ‘_wrap__gpgme_op_assuan_result_err_set’
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c:47504:27: warning[-Wmaybe-uninitialized]: ‘arg2’ may be used uninitialized
#47504 | if (arg1) (arg1)->err = arg2;
# | ~~~~~~~~~~~~^~~~~~
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/gpgme_wrap.c:47480:17: note: ‘arg2’ was declared here
#47480 | gpgme_error_t arg2 ;
# | ^~~~
#47502| {
#47503| SWIG_PYTHON_THREAD_BEGIN_ALLOW;
#47504|-> if (arg1) (arg1)->err = arg2;
#47505| SWIG_PYTHON_THREAD_END_ALLOW;
#47506| }
Error: COMPILER_WARNING (CWE-477): [#def25]
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/helpers.c: scope_hint: In function ‘_gpg_stash_callback_exception’
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/helpers.c:119:3: warning[-Wdeprecated-declarations]: ‘PyWeakref_GetObject’ is deprecated
# 119 | self = PyWeakref_GetObject(weak_self);
# | ^~~~
/usr/include/python3.13/Python.h:109: included_from: Included from here.
gpgme-1.23.2-build/gpgme-1.23.2/build-qt6/lang/python/python3.13-gpg/helpers.c:30: included_from: Included from here.
/usr/include/python3.13/weakrefobject.h:30:44: note: declared here
# 30 | Py_DEPRECATED(3.13) PyAPI_FUNC(PyObject *) PyWeakref_GetObject(PyObject *ref);
# | ^~~~~~~~~~~~~~~~~~~
# 117| }
# 118|
# 119|-> self = PyWeakref_GetObject(weak_self);
# 120| /* self only has a borrowed reference. */
# 121| if (self == Py_None) {
Error: COMPILER_WARNING (CWE-457): [#def26]
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c:3918:10: warning[-Wmaybe-uninitialized]: ‘arg2’ may be used uninitialized
# 3918 | *obj = value;
# | ~~~~~^~~~~~~
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c: scope_hint: In function ‘_wrap_gpgme_error_t_p_assign’
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c:48217:17: note: ‘arg2’ was declared here
#48217 | gpgme_error_t arg2 ;
# | ^~~~
# 3916|
# 3917| static void gpgme_error_t_p_assign(gpgme_error_t *obj, gpgme_error_t value) {
# 3918|-> *obj = value;
# 3919| }
# 3920|
Error: COMPILER_WARNING (CWE-457): [#def27]
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c: scope_hint: In function ‘_wrap_gpgme_data_seek’
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c:4116:14: warning[-Wmaybe-uninitialized]: ‘arg2’ may be used uninitialized
# 4116 | result = gpgme_data_seek(arg1,arg2,arg3);
# | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c:4077:9: note: ‘arg2’ was declared here
# 4077 | off_t arg2 ;
# | ^~~~
# 4114| {
# 4115| SWIG_PYTHON_THREAD_BEGIN_ALLOW;
# 4116|-> result = gpgme_data_seek(arg1,arg2,arg3);
# 4117| SWIG_PYTHON_THREAD_END_ALLOW;
# 4118| }
Error: COMPILER_WARNING (CWE-457): [#def28]
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c: scope_hint: In function ‘_wrap_gpgme_strerror’
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c:4676:22: warning[-Wmaybe-uninitialized]: ‘arg1’ may be used uninitialized
# 4676 | result = (char *)gpgme_strerror(arg1);
# | ^~~~~~~~~~~~~~~~~~~~
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c:4657:17: note: ‘arg1’ was declared here
# 4657 | gpgme_error_t arg1 ;
# | ^~~~
# 4674| {
# 4675| SWIG_PYTHON_THREAD_BEGIN_ALLOW;
# 4676|-> result = (char *)gpgme_strerror(arg1);
# 4677| SWIG_PYTHON_THREAD_END_ALLOW;
# 4678| }
Error: COMPILER_WARNING (CWE-457): [#def29]
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c: scope_hint: In function ‘_wrap_gpgme_strerror_r’
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c:4731:14: warning[-Wmaybe-uninitialized]: ‘arg1’ may be used uninitialized
# 4731 | result = (int)gpgme_strerror_r(arg1,arg2,arg3);
# | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c:4688:15: note: ‘arg1’ was declared here
# 4688 | gpg_error_t arg1 ;
# | ^~~~
# 4729| {
# 4730| SWIG_PYTHON_THREAD_BEGIN_ALLOW;
# 4731|-> result = (int)gpgme_strerror_r(arg1,arg2,arg3);
# 4732| SWIG_PYTHON_THREAD_END_ALLOW;
# 4733| }
Error: COMPILER_WARNING (CWE-457): [#def30]
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c: scope_hint: In function ‘_wrap_gpgme_strsource’
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c:4772:22: warning[-Wmaybe-uninitialized]: ‘arg1’ may be used uninitialized
# 4772 | result = (char *)gpgme_strsource(arg1);
# | ^~~~~~~~~~~~~~~~~~~~~
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c:4753:17: note: ‘arg1’ was declared here
# 4753 | gpgme_error_t arg1 ;
# | ^~~~
# 4770| {
# 4771| SWIG_PYTHON_THREAD_BEGIN_ALLOW;
# 4772|-> result = (char *)gpgme_strsource(arg1);
# 4773| SWIG_PYTHON_THREAD_END_ALLOW;
# 4774| }
Error: COMPILER_WARNING (CWE-457): [#def31]
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c: scope_hint: In function ‘_wrap_gpgme_err_code_to_errno’
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c:4833:14: warning[-Wmaybe-uninitialized]: ‘arg1’ may be used uninitialized
# 4833 | result = (int)gpgme_err_code_to_errno(arg1);
# | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c:4814:20: note: ‘arg1’ was declared here
# 4814 | gpgme_err_code_t arg1 ;
# | ^~~~
# 4831| {
# 4832| SWIG_PYTHON_THREAD_BEGIN_ALLOW;
# 4833|-> result = (int)gpgme_err_code_to_errno(arg1);
# 4834| SWIG_PYTHON_THREAD_END_ALLOW;
# 4835| }
Error: COMPILER_WARNING (CWE-457): [#def32]
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c: scope_hint: In function ‘_wrap_gpgme_err_make_from_errno’
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c:4918:14: warning[-Wmaybe-uninitialized]: ‘arg1’ may be used uninitialized
# 4918 | result = gpgme_err_make_from_errno(arg1,arg2);
# | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c:4892:22: note: ‘arg1’ was declared here
# 4892 | gpgme_err_source_t arg1 ;
# | ^~~~
# 4916| {
# 4917| SWIG_PYTHON_THREAD_BEGIN_ALLOW;
# 4918|-> result = gpgme_err_make_from_errno(arg1,arg2);
# 4919| SWIG_PYTHON_THREAD_END_ALLOW;
# 4920| }
Error: COMPILER_WARNING (CWE-457): [#def33]
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c: scope_hint: In function ‘_wrap__gpgme_key_sig_status_set’
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c:8660:30: warning[-Wmaybe-uninitialized]: ‘arg2’ may be used uninitialized
# 8660 | if (arg1) (arg1)->status = arg2;
# | ~~~~~~~~~~~~~~~^~~~~~
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c:8636:17: note: ‘arg2’ was declared here
# 8636 | gpgme_error_t arg2 ;
# | ^~~~
# 8658| {
# 8659| SWIG_PYTHON_THREAD_BEGIN_ALLOW;
# 8660|-> if (arg1) (arg1)->status = arg2;
# 8661| SWIG_PYTHON_THREAD_END_ALLOW;
# 8662| }
Error: COMPILER_WARNING (CWE-457): [#def34]
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c: scope_hint: In function ‘_wrap__gpgme_invalid_key_reason_set’
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c:12495:30: warning[-Wmaybe-uninitialized]: ‘arg2’ may be used uninitialized
#12495 | if (arg1) (arg1)->reason = arg2;
# | ~~~~~~~~~~~~~~~^~~~~~
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c:12471:17: note: ‘arg2’ was declared here
#12471 | gpgme_error_t arg2 ;
# | ^~~~
#12493| {
#12494| SWIG_PYTHON_THREAD_BEGIN_ALLOW;
#12495|-> if (arg1) (arg1)->reason = arg2;
#12496| SWIG_PYTHON_THREAD_END_ALLOW;
#12497| }
Error: COMPILER_WARNING (CWE-457): [#def35]
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c: scope_hint: In function ‘_wrap_gpgme_io_event_done_data_err_set’
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c:14171:27: warning[-Wmaybe-uninitialized]: ‘arg2’ may be used uninitialized
#14171 | if (arg1) (arg1)->err = arg2;
# | ~~~~~~~~~~~~^~~~~~
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c:14147:17: note: ‘arg2’ was declared here
#14147 | gpgme_error_t arg2 ;
# | ^~~~
#14169| {
#14170| SWIG_PYTHON_THREAD_BEGIN_ALLOW;
#14171|-> if (arg1) (arg1)->err = arg2;
#14172| SWIG_PYTHON_THREAD_END_ALLOW;
#14173| }
Error: COMPILER_WARNING (CWE-457): [#def36]
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c: scope_hint: In function ‘_wrap_gpgme_io_event_done_data_op_err_set’
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c:14238:30: warning[-Wmaybe-uninitialized]: ‘arg2’ may be used uninitialized
#14238 | if (arg1) (arg1)->op_err = arg2;
# | ~~~~~~~~~~~~~~~^~~~~~
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c:14214:17: note: ‘arg2’ was declared here
#14214 | gpgme_error_t arg2 ;
# | ^~~~
#14236| {
#14237| SWIG_PYTHON_THREAD_BEGIN_ALLOW;
#14238|-> if (arg1) (arg1)->op_err = arg2;
#14239| SWIG_PYTHON_THREAD_END_ALLOW;
#14240| }
Error: COMPILER_WARNING (CWE-457): [#def37]
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c: scope_hint: In function ‘_wrap_gpgme_data_new_from_filepart’
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c:16227:14: warning[-Wmaybe-uninitialized]: ‘arg4’ may be used uninitialized
#16227 | result = gpgme_data_new_from_filepart(arg1,(char const *)arg2,arg3,arg4,arg5);
# | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c:16163:9: note: ‘arg4’ was declared here
#16163 | off_t arg4 ;
# | ^~~~
#16225| {
#16226| SWIG_PYTHON_THREAD_BEGIN_ALLOW;
#16227|-> result = gpgme_data_new_from_filepart(arg1,(char const *)arg2,arg3,arg4,arg5);
#16228| SWIG_PYTHON_THREAD_END_ALLOW;
#16229| }
Error: COMPILER_WARNING (CWE-457): [#def38]
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c: scope_hint: In function ‘_wrap__gpgme_recipient_status_set’
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c:21153:30: warning[-Wmaybe-uninitialized]: ‘arg2’ may be used uninitialized
#21153 | if (arg1) (arg1)->status = arg2;
# | ~~~~~~~~~~~~~~~^~~~~~
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c:21129:17: note: ‘arg2’ was declared here
#21129 | gpgme_error_t arg2 ;
# | ^~~~
#21151| {
#21152| SWIG_PYTHON_THREAD_BEGIN_ALLOW;
#21153|-> if (arg1) (arg1)->status = arg2;
#21154| SWIG_PYTHON_THREAD_END_ALLOW;
#21155| }
Error: COMPILER_WARNING (CWE-457): [#def39]
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c: scope_hint: In function ‘_wrap__gpgme_signature_status_set’
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c:26782:30: warning[-Wmaybe-uninitialized]: ‘arg2’ may be used uninitialized
#26782 | if (arg1) (arg1)->status = arg2;
# | ~~~~~~~~~~~~~~~^~~~~~
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c:26758:17: note: ‘arg2’ was declared here
#26758 | gpgme_error_t arg2 ;
# | ^~~~
#26780| {
#26781| SWIG_PYTHON_THREAD_BEGIN_ALLOW;
#26782|-> if (arg1) (arg1)->status = arg2;
#26783| SWIG_PYTHON_THREAD_END_ALLOW;
#26784| }
Error: COMPILER_WARNING (CWE-457): [#def40]
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c: scope_hint: In function ‘_wrap__gpgme_signature_validity_reason_set’
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c:27419:39: warning[-Wmaybe-uninitialized]: ‘arg2’ may be used uninitialized
#27419 | if (arg1) (arg1)->validity_reason = arg2;
# | ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c:27395:17: note: ‘arg2’ was declared here
#27395 | gpgme_error_t arg2 ;
# | ^~~~
#27417| {
#27418| SWIG_PYTHON_THREAD_BEGIN_ALLOW;
#27419|-> if (arg1) (arg1)->validity_reason = arg2;
#27420| SWIG_PYTHON_THREAD_END_ALLOW;
#27421| }
Error: COMPILER_WARNING (CWE-457): [#def41]
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c: scope_hint: In function ‘_wrap__gpgme_import_status_result_set’
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c:31025:30: warning[-Wmaybe-uninitialized]: ‘arg2’ may be used uninitialized
#31025 | if (arg1) (arg1)->result = arg2;
# | ~~~~~~~~~~~~~~~^~~~~~
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c:31001:17: note: ‘arg2’ was declared here
#31001 | gpgme_error_t arg2 ;
# | ^~~~
#31023| {
#31024| SWIG_PYTHON_THREAD_BEGIN_ALLOW;
#31025|-> if (arg1) (arg1)->result = arg2;
#31026| SWIG_PYTHON_THREAD_END_ALLOW;
#31027| }
Error: COMPILER_WARNING (CWE-457): [#def42]
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c: scope_hint: In function ‘_wrap_gpgme_op_receive_keys_start’
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c:32996:19: warning[-Wmaybe-uninitialized]: ‘size2’ may be used uninitialized
#32996 | for (i = 0; i < size2; i++)
# | ~~^~~~~~~
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c:32924:10: note: ‘size2’ was declared here
#32924 | size_t size2 ;
# | ^~~~~
#32994| size_t i;
#32995| free(vector2);
#32996|-> for (i = 0; i < size2; i++)
#32997| Py_XDECREF(pyVector2[i]);
#32998| }
Error: COMPILER_WARNING (CWE-457): [#def43]
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c: scope_hint: In function ‘_wrap_gpgme_op_receive_keys’
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c:33082:19: warning[-Wmaybe-uninitialized]: ‘size2’ may be used uninitialized
#33082 | for (i = 0; i < size2; i++)
# | ~~^~~~~~~
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c:33010:10: note: ‘size2’ was declared here
#33010 | size_t size2 ;
# | ^~~~~
#33080| size_t i;
#33081| free(vector2);
#33082|-> for (i = 0; i < size2; i++)
#33083| Py_XDECREF(pyVector2[i]);
#33084| }
Error: COMPILER_WARNING (CWE-457): [#def44]
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c: scope_hint: In function ‘_wrap_gpgme_op_export_ext_start’
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c:33875:19: warning[-Wmaybe-uninitialized]: ‘size2’ may be used uninitialized
#33875 | for (i = 0; i < size2; i++)
# | ~~^~~~~~~
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c:33670:10: note: ‘size2’ was declared here
#33670 | size_t size2 ;
# | ^~~~~
#33873| size_t i;
#33874| free(vector2);
#33875|-> for (i = 0; i < size2; i++)
#33876| Py_XDECREF(pyVector2[i]);
#33877| }
Error: COMPILER_WARNING (CWE-457): [#def45]
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c: scope_hint: In function ‘_wrap_gpgme_op_export_ext’
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c:34191:19: warning[-Wmaybe-uninitialized]: ‘size2’ may be used uninitialized
#34191 | for (i = 0; i < size2; i++)
# | ~~^~~~~~~
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c:33986:10: note: ‘size2’ was declared here
#33986 | size_t size2 ;
# | ^~~~~
#34189| size_t i;
#34190| free(vector2);
#34191|-> for (i = 0; i < size2; i++)
#34192| Py_XDECREF(pyVector2[i]);
#34193| }
Error: COMPILER_WARNING (CWE-457): [#def46]
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c: scope_hint: In function ‘_wrap_gpgme_op_keylist_ext_start’
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c:39399:19: warning[-Wmaybe-uninitialized]: ‘size2’ may be used uninitialized
#39399 | for (i = 0; i < size2; i++)
# | ~~^~~~~~~
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c:39313:10: note: ‘size2’ was declared here
#39313 | size_t size2 ;
# | ^~~~~
#39397| size_t i;
#39398| free(vector2);
#39399|-> for (i = 0; i < size2; i++)
#39400| Py_XDECREF(pyVector2[i]);
#39401| }
Error: COMPILER_WARNING (CWE-457): [#def47]
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c: scope_hint: In function ‘_wrap_gpgme_op_spawn_start’
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c:40968:19: warning[-Wmaybe-uninitialized]: ‘size3’ may be used uninitialized
#40968 | for (i = 0; i < size3; i++)
# | ~~^~~~~~~
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c:40843:10: note: ‘size3’ was declared here
#40843 | size_t size3 ;
# | ^~~~~
#40966| size_t i;
#40967| free(vector3);
#40968|-> for (i = 0; i < size3; i++)
#40969| Py_XDECREF(pyVector3[i]);
#40970| }
Error: COMPILER_WARNING (CWE-457): [#def48]
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c: scope_hint: In function ‘_wrap_gpgme_op_spawn’
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c:41113:19: warning[-Wmaybe-uninitialized]: ‘size3’ may be used uninitialized
#41113 | for (i = 0; i < size3; i++)
# | ~~^~~~~~~
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c:40988:10: note: ‘size3’ was declared here
#40988 | size_t size3 ;
# | ^~~~~
#41111| size_t i;
#41112| free(vector3);
#41113|-> for (i = 0; i < size3; i++)
#41114| Py_XDECREF(pyVector3[i]);
#41115| }
Error: COMPILER_WARNING (CWE-457): [#def49]
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c: scope_hint: In function ‘_wrap__gpgme_op_assuan_result_err_set’
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c:47504:27: warning[-Wmaybe-uninitialized]: ‘arg2’ may be used uninitialized
#47504 | if (arg1) (arg1)->err = arg2;
# | ~~~~~~~~~~~~^~~~~~
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/gpgme_wrap.c:47480:17: note: ‘arg2’ was declared here
#47480 | gpgme_error_t arg2 ;
# | ^~~~
#47502| {
#47503| SWIG_PYTHON_THREAD_BEGIN_ALLOW;
#47504|-> if (arg1) (arg1)->err = arg2;
#47505| SWIG_PYTHON_THREAD_END_ALLOW;
#47506| }
Error: COMPILER_WARNING (CWE-477): [#def50]
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/helpers.c: scope_hint: In function ‘_gpg_stash_callback_exception’
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/helpers.c:119:3: warning[-Wdeprecated-declarations]: ‘PyWeakref_GetObject’ is deprecated
# 119 | self = PyWeakref_GetObject(weak_self);
# | ^~~~
/usr/include/python3.13/Python.h:109: included_from: Included from here.
gpgme-1.23.2-build/gpgme-1.23.2/build/lang/python/python3.13-gpg/helpers.c:30: included_from: Included from here.
/usr/include/python3.13/weakrefobject.h:30:44: note: declared here
# 30 | Py_DEPRECATED(3.13) PyAPI_FUNC(PyObject *) PyWeakref_GetObject(PyObject *ref);
# | ^~~~~~~~~~~~~~~~~~~
# 117| }
# 118|
# 119|-> self = PyWeakref_GetObject(weak_self);
# 120| /* self only has a borrowed reference. */
# 121| if (self == Py_None) {
Error: CPPCHECK_WARNING: [#def51]
gpgme-1.23.2-build/gpgme-1.23.2/doc/mkdefsinc.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CLANG_WARNING: [#def52]
gpgme-1.23.2-build/gpgme-1.23.2/doc/mkdefsinc.c:199:15: warning[unix.Malloc]: Potential leak of memory pointed to by 'opt_date'
# 197| {
# 198| opt_date = xstrdup (*argv);
# 199|-> argc--; argv++;
# 200| }
# 201| }
Error: GCC_ANALYZER_WARNING (CWE-401): [#def53]
gpgme-1.23.2-build/gpgme-1.23.2/doc/mkdefsinc.c: scope_hint: In function ‘main’
gpgme-1.23.2-build/gpgme-1.23.2/doc/mkdefsinc.c:199:27: warning[-Wanalyzer-malloc-leak]: leak of ‘opt_date’
# 197| {
# 198| opt_date = xstrdup (*argv);
# 199|-> argc--; argv++;
# 200| }
# 201| }
Error: CPPCHECK_WARNING (CWE-457): [#def54]
gpgme-1.23.2-build/gpgme-1.23.2/doc/mkdefsinc.c:289: warning[uninitvar]: Uninitialized variable: monthoff
# 287|
# 288| printf ("@set UPDATED %s\n", opt_date);
# 289|-> printf ("@set UPDATED-MONTH %s\n", opt_date + monthoff);
# 290| printf ("@set EDITION %s\n", PACKAGE_VERSION);
# 291| printf ("@set VERSION %s\n", PACKAGE_VERSION);
Error: CLANG_WARNING: [#def55]
gpgme-1.23.2-build/gpgme-1.23.2/doc/mkdefsinc.c:290:3: warning[unix.Malloc]: Potential leak of memory pointed to by 'opt_date'
# 288| printf ("@set UPDATED %s\n", opt_date);
# 289| printf ("@set UPDATED-MONTH %s\n", opt_date + monthoff);
# 290|-> printf ("@set EDITION %s\n", PACKAGE_VERSION);
# 291| printf ("@set VERSION %s\n", PACKAGE_VERSION);
# 292|
Error: CPPCHECK_WARNING: [#def56]
gpgme-1.23.2-build/gpgme-1.23.2/lang/cpp/src/context.cpp: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CPPCHECK_WARNING: [#def57]
gpgme-1.23.2-build/gpgme-1.23.2/lang/cpp/src/gpgsignkeyeditinteractor.cpp: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CPPCHECK_WARNING: [#def58]
gpgme-1.23.2-build/gpgme-1.23.2/lang/cpp/src/importresult.cpp: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CPPCHECK_WARNING: [#def59]
gpgme-1.23.2-build/gpgme-1.23.2/lang/cpp/src/key.cpp: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CPPCHECK_WARNING: [#def60]
gpgme-1.23.2-build/gpgme-1.23.2/lang/cpp/src/verificationresult.cpp: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CPPCHECK_WARNING: [#def61]
gpgme-1.23.2-build/gpgme-1.23.2/lang/cpp/tests/run-getkey.cpp: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CPPCHECK_WARNING: [#def62]
gpgme-1.23.2-build/gpgme-1.23.2/lang/cpp/tests/run-keylist.cpp: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CPPCHECK_WARNING: [#def63]
gpgme-1.23.2-build/gpgme-1.23.2/lang/cpp/tests/run-verify.cpp: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CPPCHECK_WARNING: [#def64]
gpgme-1.23.2-build/gpgme-1.23.2/lang/cpp/tests/run-wkdlookup.cpp: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CLANG_WARNING: [#def65]
gpgme-1.23.2-build/gpgme-1.23.2/lang/qt/src/cryptoconfig.cpp:61:42: warning[core.CallAndMessage]: Called C++ object pointer is null
# 59| const QStringList groupNames = comp ? comp->groupList() : QStringList();
# 60| for (const auto &groupName : groupNames) {
# 61|-> const CryptoConfigGroup *group = comp->group(groupName);
# 62| CryptoConfigEntry *entry = group ? group->entry(entryName) : nullptr;
# 63| if (entry) {
Error: CPPCHECK_WARNING: [#def66]
gpgme-1.23.2-build/gpgme-1.23.2/src/argparse.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CPPCHECK_WARNING: [#def67]
gpgme-1.23.2-build/gpgme-1.23.2/src/assuan-support.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CPPCHECK_WARNING: [#def68]
gpgme-1.23.2-build/gpgme-1.23.2/src/cJSON.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CLANG_WARNING: [#def69]
gpgme-1.23.2-build/gpgme-1.23.2/src/conversion.c:562:30: warning[core.UndefinedBinaryOperatorResult]: The right operand of '==' is a garbage value
# 560|
# 561| tim = _gpgme_parse_timestamp (timestamp, &tail);
# 562|-> if (tim == -1 || timestamp == tail || (*tail && *tail != ' '))
# 563| tim = 0; /* No time given or invalid engine. */
# 564|
Error: GCC_ANALYZER_WARNING (CWE-465): [#def70]
gpgme-1.23.2-build/gpgme-1.23.2/src/data-identify.c: scope_hint: In function 'basic_detection'
gpgme-1.23.2-build/gpgme-1.23.2/src/data-identify.c:453:20: warning[-Wanalyzer-deref-before-check]: check of 'data' for NULL after already dereferencing it
# 451|
# 452| /* Now check whether there are armor lines. */
# 453|-> for (s = data; s && *s; s = (*s=='\n')?(s+1):((s=strchr (s,'\n'))?(s+1):s))
# 454| {
# 455| if (!strncmp (s, "-----BEGIN ", 11))
Error: CLANG_WARNING: [#def71]
gpgme-1.23.2-build/gpgme-1.23.2/src/data-mem.c:104:3: warning[core.NonNullParamChecker]: Null pointer passed to 1st parameter expecting 'nonnull'
# 102| }
# 103|
# 104|-> memcpy (dh->data.mem.buffer + dh->data.mem.offset, buffer, size);
# 105| dh->data.mem.offset += size;
# 106| if (dh->data.mem.length < dh->data.mem.offset)
Error: CLANG_WARNING: [#def72]
gpgme-1.23.2-build/gpgme-1.23.2/src/data-mem.c:275:14: warning[core.NullDereference]: Dereference of null pointer (loaded from variable 'str')
# 273| {
# 274| if (blankout && len)
# 275|-> *str = 0;
# 276| /* Prevent mem_release from releasing the buffer memory. We
# 277| * must not fail from this point. */
Error: GCC_ANALYZER_WARNING (CWE-401): [#def73]
gpgme-1.23.2-build/gpgme-1.23.2/src/data.c: scope_hint: In function '_gpgme_data_inbound_handler'
gpgme-1.23.2-build/gpgme-1.23.2/src/data.c:624:14: warning[-Wanalyzer-malloc-leak]: leak of 'malloc((long unsigned int)*dh.io_buffer_size)'
# 622| {
# 623| dh->inbound_buffer = malloc (dh->io_buffer_size);
# 624|-> if (!dh->inbound_buffer)
# 625| return TRACE_ERR (gpg_error_from_syserror ());
# 626| }
Error: GCC_ANALYZER_WARNING (CWE-401): [#def74]
gpgme-1.23.2-build/gpgme-1.23.2/src/data.c: scope_hint: In function '_gpgme_data_outbound_handler'
gpgme-1.23.2-build/gpgme-1.23.2/src/data.c:684:14: warning[-Wanalyzer-malloc-leak]: leak of 'malloc((long unsigned int)*dh.io_buffer_size)'
# 682| {
# 683| dh->outbound_buffer = malloc (dh->io_buffer_size);
# 684|-> if (!dh->outbound_buffer)
# 685| return TRACE_ERR (gpg_error_from_syserror ());
# 686| dh->outbound_pending = 0;
Error: CPPCHECK_WARNING: [#def75]
gpgme-1.23.2-build/gpgme-1.23.2/src/decrypt-verify.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CPPCHECK_WARNING (CWE-457): [#def76]
gpgme-1.23.2-build/gpgme-1.23.2/src/decrypt-verify.c:48: warning[uninitvar]: Uninitialized variable: err2
# 46| || (code == GPGME_STATUS_EOF && gpg_err_code (err) == GPG_ERR_NO_DATA))
# 47| err2 = _gpgme_verify_status_handler (priv, code, args);
# 48|-> return err ? err : err2;
# 49| }
# 50|
Error: CPPCHECK_WARNING: [#def77]
gpgme-1.23.2-build/gpgme-1.23.2/src/encrypt-sign.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CPPCHECK_WARNING: [#def78]
gpgme-1.23.2-build/gpgme-1.23.2/src/encrypt.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CLANG_WARNING: [#def79]
gpgme-1.23.2-build/gpgme-1.23.2/src/engine-g13.c:457:6: warning[deadcode.DeadStores]: Value stored to 'rest' is never read
# 455| rest = strchr (line + 2, ' ');
# 456| if (!rest)
# 457|-> rest = line + linelen; /* set to an empty string */
# 458| else
# 459| *(rest++) = 0;
Error: CLANG_WARNING: [#def80]
gpgme-1.23.2-build/gpgme-1.23.2/src/engine-gpg.c:3121:8: warning[core.CallAndMessage]: 1st function call argument is an uninitialized value
# 3119| }
# 3120|
# 3121|-> if (!strcmp (field[0], "info"))
# 3122| rectype = RT_INFO;
# 3123| else if (!strcmp (field[0], "pub"))
Error: CLANG_WARNING: [#def81]
gpgme-1.23.2-build/gpgme-1.23.2/src/engine-gpg.c:3195:26: warning[core.CallAndMessage]: 1st function call argument is an uninitialized value
# 3193| most 4/3 th the number of bytes. But because we also need
# 3194| to escape the backslashes we allocate twice as much. */
# 3195|-> char *uid = malloc (2 * strlen (field[1]) + 1);
# 3196| char *src;
# 3197| char *dst;
Error: CLANG_WARNING: [#def82]
gpgme-1.23.2-build/gpgme-1.23.2/src/engine-gpg.c:3239:14: warning[unix.Malloc]: Potential leak of memory pointed to by 'dst'
# 3237| }
# 3238| }
# 3239|-> return 0;
# 3240|
# 3241| case RT_NONE:
Error: CLANG_WARNING: [#def83]
gpgme-1.23.2-build/gpgme-1.23.2/src/engine-gpg.c:3282:7: warning[deadcode.DeadStores]: Value stored to 'err' is never read
# 3280| if (!err && (mode & GPGME_KEYLIST_MODE_WITH_SECRET))
# 3281| {
# 3282|-> err = add_arg (gpg, "--with-secret");
# 3283| err = add_arg (gpg, "--with-keygrip");
# 3284| }
Error: CLANG_WARNING: [#def84]
gpgme-1.23.2-build/gpgme-1.23.2/src/engine-gpg.c:3715:13: warning[deadcode.DeadStores]: Value stored to 'err' is never read
# 3713| err = add_arg (gpg, "--directory");
# 3714| if (!err)
# 3715|-> err = add_arg (gpg, file_name);
# 3716| }
# 3717| /* gpgtar uses --decrypt also for signed-only archives */
Error: CLANG_WARNING: [#def85]
gpgme-1.23.2-build/gpgme-1.23.2/src/engine-gpgconf.c:1041:5: warning[deadcode.DeadStores]: Value stored to 'err' is never read
# 1039|
# 1040| if (!err)
# 1041|-> err = gpg_error(GPG_ERR_NOT_FOUND);
# 1042| return 0;
# 1043| }
Error: GCC_ANALYZER_WARNING (CWE-401): [#def86]
gpgme-1.23.2-build/gpgme-1.23.2/src/engine-gpgsm.c: scope_hint: In function 'gpgsm_export.part.0'
gpgme-1.23.2-build/gpgme-1.23.2/src/engine-gpgsm.c:1628:12: warning[-Wanalyzer-malloc-leak]: leak of 'cmd'
# 1626| : map_data_enc (gpgsm->output_cb.data));
# 1627| if (err)
# 1628|-> return err;
# 1629| gpgsm_clear_fd (gpgsm, INPUT_FD);
# 1630| gpgsm_clear_fd (gpgsm, MESSAGE_FD);
Error: CLANG_WARNING: [#def87]
gpgme-1.23.2-build/gpgme-1.23.2/src/engine-gpgsm.c:1628:12: warning[unix.Malloc]: Potential leak of memory pointed to by 'cmd'
# 1626| : map_data_enc (gpgsm->output_cb.data));
# 1627| if (err)
# 1628|-> return err;
# 1629| gpgsm_clear_fd (gpgsm, INPUT_FD);
# 1630| gpgsm_clear_fd (gpgsm, MESSAGE_FD);
Error: GCC_ANALYZER_WARNING (CWE-401): [#def88]
gpgme-1.23.2-build/gpgme-1.23.2/src/engine-gpgsm.c: scope_hint: In function 'gpgsm_export_ext.part.0'
gpgme-1.23.2-build/gpgme-1.23.2/src/engine-gpgsm.c:1735:12: warning[-Wanalyzer-malloc-leak]: leak of 'line'
# 1733| : map_data_enc (gpgsm->output_cb.data));
# 1734| if (err)
# 1735|-> return err;
# 1736| gpgsm_clear_fd (gpgsm, INPUT_FD);
# 1737| gpgsm_clear_fd (gpgsm, MESSAGE_FD);
Error: CLANG_WARNING: [#def89]
gpgme-1.23.2-build/gpgme-1.23.2/src/engine-gpgsm.c:1735:12: warning[unix.Malloc]: Potential leak of memory pointed to by 'line'
# 1733| : map_data_enc (gpgsm->output_cb.data));
# 1734| if (err)
# 1735|-> return err;
# 1736| gpgsm_clear_fd (gpgsm, INPUT_FD);
# 1737| gpgsm_clear_fd (gpgsm, MESSAGE_FD);
Error: CLANG_WARNING: [#def90]
gpgme-1.23.2-build/gpgme-1.23.2/src/export.c:207:3: warning[deadcode.DeadStores]: Value stored to 'opd' is never read
# 205| err = _gpgme_op_data_lookup (ctx, OPDATA_EXPORT, &hook,
# 206| sizeof (*opd), release_op_data);
# 207|-> opd = hook;
# 208| if (err)
# 209| return err;
Error: CLANG_WARNING: [#def91]
gpgme-1.23.2-build/gpgme-1.23.2/src/export.c:282:3: warning[deadcode.DeadStores]: Value stored to 'opd' is never read
# 280| err = _gpgme_op_data_lookup (ctx, OPDATA_EXPORT, &hook,
# 281| sizeof (*opd), release_op_data);
# 282|-> opd = hook;
# 283| if (err)
# 284| return err;
Error: CLANG_WARNING: [#def92]
gpgme-1.23.2-build/gpgme-1.23.2/src/genkey.c:346:3: warning[deadcode.DeadStores]: Value stored to 'opd' is never read
# 344| err = _gpgme_op_data_lookup (ctx, OPDATA_GENKEY, &hook,
# 345| sizeof (*opd), release_op_data);
# 346|-> opd = hook;
# 347| if (err)
# 348| return err;
Error: CLANG_WARNING: [#def93]
gpgme-1.23.2-build/gpgme-1.23.2/src/genkey.c:434:3: warning[deadcode.DeadStores]: Value stored to 'opd' is never read
# 432| err = _gpgme_op_data_lookup (ctx, OPDATA_GENKEY, &hook,
# 433| sizeof (*opd), release_op_data);
# 434|-> opd = hook;
# 435| if (err)
# 436| return err;
Error: CLANG_WARNING: [#def94]
gpgme-1.23.2-build/gpgme-1.23.2/src/genkey.c:642:12: warning[deadcode.DeadStores]: Although the value stored to 'err' is used in the enclosing expression, the value is never actually read from 'err'
# 640| }
# 641| else
# 642|-> return err = gpg_error (GPG_ERR_UNKNOWN_NAME);
# 643|
# 644| if (synchronous && !err)
Error: CLANG_WARNING: [#def95]
gpgme-1.23.2-build/gpgme-1.23.2/src/gpgme-json.c:323:9: warning[deadcode.DeadStores]: Although the value stored to 'j_tmp' is used in the enclosing expression, the value is never actually read from 'j_tmp'
# 321| response = json? json : xjson_CreateObject ();
# 322|
# 323|-> if (!(j_tmp = cJSON_GetObjectItem (response, "type")))
# 324| xjson_AddStringToObject (response, "type", "error");
# 325| else /* Replace existing "type". */
Error: CLANG_WARNING: [#def96]
gpgme-1.23.2-build/gpgme-1.23.2/src/gpgme-json.c:743:12: warning[deadcode.DeadStores]: Although the value stored to 'err' is used in the enclosing expression, the value is never actually read from 'err'
# 741| }
# 742|
# 743|-> while (!(err = gpgme_op_keylist_next (ctx, &key)))
# 744| {
# 745| if (!key || !key->fpr)
Error: CLANG_WARNING: [#def97]
gpgme-1.23.2-build/gpgme-1.23.2/src/gpgme-json.c:1573:9: warning[deadcode.DeadStores]: Value stored to 'data' is never read
# 1571| xfree (data);
# 1572| if (opt_interactive)
# 1573|-> data = cJSON_Print (err_obj);
# 1574| data = cJSON_PrintUnformatted (err_obj);
# 1575|
Error: CLANG_WARNING: [#def98]
gpgme-1.23.2-build/gpgme-1.23.2/src/gpgme-json.c:1709:16: warning[deadcode.DeadStores]: Although the value stored to 'err' is used in the enclosing expression, the value is never actually read from 'err'
# 1707| goto leave;
# 1708| }
# 1709|-> while (!(err = gpgme_op_keylist_next (keylist_ctx, &key)))
# 1710| {
# 1711| if ((err = gpgme_signers_add (ctx, key)))
Error: CLANG_WARNING: [#def99]
gpgme-1.23.2-build/gpgme-1.23.2/src/gpgme-json.c:2028:12: warning[deadcode.DeadStores]: Although the value stored to 'err' is used in the enclosing expression, the value is never actually read from 'err'
# 2026| goto leave;
# 2027| }
# 2028|-> while (!(err = gpgme_op_keylist_next (keylist_ctx, &key)))
# 2029| {
# 2030| if ((err = gpgme_signers_add (ctx, key)))
Error: CLANG_WARNING: [#def100]
gpgme-1.23.2-build/gpgme-1.23.2/src/gpgme-json.c:2500:12: warning[deadcode.DeadStores]: Although the value stored to 'err' is used in the enclosing expression, the value is never actually read from 'err'
# 2498| }
# 2499|
# 2500|-> while (!(err = gpgme_op_keylist_next (ctx, &key)))
# 2501| {
# 2502| cJSON_AddItemToArray (keyarray, key_to_json (key));
Error: CLANG_WARNING: [#def101]
gpgme-1.23.2-build/gpgme-1.23.2/src/gpgme-json.c:2853:3: warning[deadcode.DeadStores]: Value stored to 'comp' is never read
# 2851| }
# 2852|
# 2853|-> comp = conf;
# 2854| for (comp = conf; comp; comp = comp->next)
# 2855| {
Error: CLANG_WARNING: [#def102]
gpgme-1.23.2-build/gpgme-1.23.2/src/gpgme-json.c:2952:3: warning[deadcode.DeadStores]: Value stored to 'comp' is never read
# 2950|
# 2951| j_comps = xjson_CreateArray ();
# 2952|-> comp = conf;
# 2953| for (comp = conf; comp; comp = comp->next)
# 2954| {
Error: CLANG_WARNING: [#def103]
gpgme-1.23.2-build/gpgme-1.23.2/src/gpgme-json.c:3070:15: warning[deadcode.DeadStores]: Value stored to 's' during its initialization is never read
# 3068| data_type_to_string (gpgme_data_type_t dt)
# 3069| {
# 3070|-> const char *s = "[?]";
# 3071|
# 3072| switch (dt)
Error: CLANG_WARNING: [#def104]
gpgme-1.23.2-build/gpgme-1.23.2/src/gpgme-json.c:3384:9: warning[deadcode.DeadStores]: Value stored to 'res' is never read
# 3382| err_obj = error_object (NULL, "Printing JSON data failed");
# 3383| if (opt_interactive)
# 3384|-> res = cJSON_Print (err_obj);
# 3385| res = cJSON_PrintUnformatted (err_obj);
# 3386| cJSON_Delete (err_obj);
Error: CLANG_WARNING: [#def105]
gpgme-1.23.2-build/gpgme-1.23.2/src/gpgme-json.c:3494:7: warning[deadcode.DeadStores]: Value stored to 'n' is never read
# 3492| *p++ = *s++;
# 3493| *p = 0;
# 3494|-> n = p - line;
# 3495| }
# 3496|
Error: CLANG_WARNING: [#def106]
gpgme-1.23.2-build/gpgme-1.23.2/src/gpgme-json.c:3569:24: warning[core.NullDereference]: Access to field 'type' results in a dereference of a null pointer (loaded from variable 'j_msg')
# 3567| {
# 3568| j_msg = cJSON_GetObjectItem (json, "msg");
# 3569|-> if (j_msg || cjson_is_string (j_msg))
# 3570| {
# 3571| msg = j_msg->valuestring;
Error: CLANG_WARNING: [#def107]
gpgme-1.23.2-build/gpgme-1.23.2/src/gpgme-json.c:3773:11: warning[deadcode.DeadStores]: Value stored to 'err' is never read
# 3771| if (!request)
# 3772| {
# 3773|-> err = gpg_error_from_syserror ();
# 3774| log_error ("error reading request: Not enough memory for %zu MiB)\n",
# 3775| (size_t)nrequest / (1024*1024));
Error: CPPCHECK_WARNING: [#def108]
gpgme-1.23.2-build/gpgme-1.23.2/src/gpgme-tool.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: GCC_ANALYZER_WARNING (CWE-688): [#def109]
gpgme-1.23.2-build/gpgme-1.23.2/src/gpgme-tool.c: scope_hint: In function ‘put_membuf.part.0’
gpgme-1.23.2-build/gpgme-1.23.2/src/gpgme-tool.c:140:3: warning[-Wanalyzer-null-argument]: use of NULL ‘mb.buf’ where non-null expected
gpgme-1.23.2-build/gpgme-1.23.2/src/gpgme-tool.c: scope_hint: In function ‘put_membuf.part.0’
gpgme-1.23.2-build/gpgme-1.23.2/src/gpgme-tool.c:29: included_from: Included from here.
gpgme-1.23.2-build/gpgme-1.23.2/src/gpgme-tool.c: scope_hint: In function ‘put_membuf.part.0’
<built-in>: note: argument 1 of ‘__builtin_memcpy’ must be non-null
# 138| mb->buf = p;
# 139| }
# 140|-> memcpy (mb->buf + mb->len, buf, len);
# 141| mb->len += len;
# 142| }
Error: CLANG_WARNING: [#def110]
gpgme-1.23.2-build/gpgme-1.23.2/src/gpgme-tool.c:331:3: warning[core.VLASize]: Declared variable-length array (VLA) has negative size
# 329| result_xml_indent (struct result_xml_state *state)
# 330| {
# 331|-> char spaces[state->indent + 1];
# 332| int i;
# 333| for (i = 0; i < state->indent; i++)
Error: CLANG_WARNING: [#def111]
gpgme-1.23.2-build/gpgme-1.23.2/src/gpgme-tool.c:331:3: warning[core.VLASize]: Declared variable-length array (VLA) has zero size
# 329| result_xml_indent (struct result_xml_state *state)
# 330| {
# 331|-> char spaces[state->indent + 1];
# 332| int i;
# 333| for (i = 0; i < state->indent; i++)
Error: CLANG_WARNING: [#def112]
gpgme-1.23.2-build/gpgme-1.23.2/src/gpgme-tool.c:1466:3: warning[core.CallAndMessage]: 4th function call argument is an uninitialized value
# 1464| modes[idx++] = NULL;
# 1465|
# 1466|-> gt_write_status (gt, STATUS_KEYLIST_MODE, modes[0], modes[1], modes[2],
# 1467| modes[3], modes[4], modes[5], modes[6], NULL);
# 1468|
Error: CLANG_WARNING: [#def113]
gpgme-1.23.2-build/gpgme-1.23.2/src/gpgme-tool.c:1466:3: warning[core.CallAndMessage]: 5th function call argument is an uninitialized value
# 1464| modes[idx++] = NULL;
# 1465|
# 1466|-> gt_write_status (gt, STATUS_KEYLIST_MODE, modes[0], modes[1], modes[2],
# 1467| modes[3], modes[4], modes[5], modes[6], NULL);
# 1468|
Error: CLANG_WARNING: [#def114]
gpgme-1.23.2-build/gpgme-1.23.2/src/gpgme-tool.c:1466:3: warning[core.CallAndMessage]: 6th function call argument is an uninitialized value
# 1464| modes[idx++] = NULL;
# 1465|
# 1466|-> gt_write_status (gt, STATUS_KEYLIST_MODE, modes[0], modes[1], modes[2],
# 1467| modes[3], modes[4], modes[5], modes[6], NULL);
# 1468|
Error: CLANG_WARNING: [#def115]
gpgme-1.23.2-build/gpgme-1.23.2/src/gpgme-tool.c:1466:3: warning[core.CallAndMessage]: 7th function call argument is an uninitialized value
# 1464| modes[idx++] = NULL;
# 1465|
# 1466|-> gt_write_status (gt, STATUS_KEYLIST_MODE, modes[0], modes[1], modes[2],
# 1467| modes[3], modes[4], modes[5], modes[6], NULL);
# 1468|
Error: CLANG_WARNING: [#def116]
gpgme-1.23.2-build/gpgme-1.23.2/src/gpgme-tool.c:1466:3: warning[core.CallAndMessage]: 8th function call argument is an uninitialized value
# 1464| modes[idx++] = NULL;
# 1465|
# 1466|-> gt_write_status (gt, STATUS_KEYLIST_MODE, modes[0], modes[1], modes[2],
# 1467| modes[3], modes[4], modes[5], modes[6], NULL);
# 1468|
Error: CLANG_WARNING: [#def117]
gpgme-1.23.2-build/gpgme-1.23.2/src/gpgme-tool.c:1466:3: warning[core.CallAndMessage]: 9th function call argument is an uninitialized value
# 1464| modes[idx++] = NULL;
# 1465|
# 1466|-> gt_write_status (gt, STATUS_KEYLIST_MODE, modes[0], modes[1], modes[2],
# 1467| modes[3], modes[4], modes[5], modes[6], NULL);
# 1468|
Error: CLANG_WARNING: [#def118]
gpgme-1.23.2-build/gpgme-1.23.2/src/gpgme-tool.c:1687:15: warning[deadcode.DeadStores]: Value stored to 's' during its initialization is never read
# 1685| gt_identify (gpgme_tool_t gt, gpgme_data_t data)
# 1686| {
# 1687|-> const char *s = "?";
# 1688|
# 1689| switch (gpgme_data_identify (data, 0))
Error: CPPCHECK_WARNING (CWE-562): [#def119]
gpgme-1.23.2-build/gpgme-1.23.2/src/gpgme-tool.c:3300: error[autoVariables]: Address of local auto-variable assigned to a function parameter.
# 3298| server.gt = gt;
# 3299| gt->write_status = server_write_status;
# 3300|-> gt->write_status_hook = &server;
# 3301| gt->write_data = server_write_data;
# 3302| gt->write_data_hook = &server;
Error: CPPCHECK_WARNING (CWE-562): [#def120]
gpgme-1.23.2-build/gpgme-1.23.2/src/gpgme-tool.c:3302: error[autoVariables]: Address of local auto-variable assigned to a function parameter.
# 3300| gt->write_status_hook = &server;
# 3301| gt->write_data = server_write_data;
# 3302|-> gt->write_data_hook = &server;
# 3303|
# 3304| /* We use a pipe based server so that we can work from scripts.
Error: GCC_ANALYZER_WARNING (CWE-457): [#def121]
gpgme-1.23.2-build/gpgme-1.23.2/src/key.c: scope_hint: In function 'gpgme_key_from_uid'
gpgme-1.23.2-build/gpgme-1.23.2/src/key.c:420:9: warning[-Wanalyzer-use-of-uninitialized-value]: use of uninitialized value 'key'
# 418|
# 419| /* Note: protocol doesn't matter if only email is provided. */
# 420|-> err = _gpgme_key_append_name (key, name, 0);
# 421| if (err)
# 422| gpgme_key_unref (key);
Error: CLANG_WARNING: [#def122]
gpgme-1.23.2-build/gpgme-1.23.2/src/keylist.c:1197:3: warning[deadcode.DeadStores]: Value stored to 'opd' is never read
# 1195| err = _gpgme_op_data_lookup (ctx, OPDATA_KEYLIST, &hook,
# 1196| sizeof (*opd), release_op_data);
# 1197|-> opd = hook;
# 1198| if (err)
# 1199| return TRACE_ERR (err);
Error: CLANG_WARNING: [#def123]
gpgme-1.23.2-build/gpgme-1.23.2/src/keylist.c:1241:3: warning[deadcode.DeadStores]: Value stored to 'opd' is never read
# 1239| err = _gpgme_op_data_lookup (ctx, OPDATA_KEYLIST, &hook,
# 1240| sizeof (*opd), release_op_data);
# 1241|-> opd = hook;
# 1242| if (err)
# 1243| return TRACE_ERR (err);
Error: CLANG_WARNING: [#def124]
gpgme-1.23.2-build/gpgme-1.23.2/src/keylist.c:1282:3: warning[deadcode.DeadStores]: Value stored to 'opd' is never read
# 1280| err = _gpgme_op_data_lookup (ctx, OPDATA_KEYLIST, &hook,
# 1281| sizeof (*opd), release_op_data);
# 1282|-> opd = hook;
# 1283| if (err)
# 1284| return TRACE_ERR (err);
Error: CLANG_WARNING: [#def125]
gpgme-1.23.2-build/gpgme-1.23.2/src/keysign.c:168:3: warning[deadcode.DeadStores]: Value stored to 'opd' is never read
# 166| err = _gpgme_op_data_lookup (ctx, OPDATA_KEYSIGN, &hook,
# 167| sizeof (*opd), release_op_data);
# 168|-> opd = hook;
# 169| if (err)
# 170| return err;
Error: CPPCHECK_WARNING: [#def126]
gpgme-1.23.2-build/gpgme-1.23.2/src/mbox-util.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CLANG_WARNING: [#def127]
gpgme-1.23.2-build/gpgme-1.23.2/src/op-support.c:129:7: warning[deadcode.DeadStores]: Value stored to 'err' is never read
# 127| if (!reuse_engine)
# 128| {
# 129|-> err = 0;
# 130| #ifdef LC_CTYPE
# 131| err = _gpgme_engine_set_locale (ctx->engine, LC_CTYPE, ctx->lc_ctype);
Error: CPPCHECK_WARNING: [#def128]
gpgme-1.23.2-build/gpgme-1.23.2/src/parsetlv.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CPPCHECK_WARNING: [#def129]
gpgme-1.23.2-build/gpgme-1.23.2/src/passwd.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CLANG_WARNING: [#def130]
gpgme-1.23.2-build/gpgme-1.23.2/src/posix-io.c:452:4: warning[deadcode.DeadStores]: Value stored to 'source' is never read
# 450| if (scres >= 0)
# 451| {
# 452|-> source = "_SC_OPEN_MAX";
# 453| return scres;
# 454| }
Error: GCC_ANALYZER_WARNING (CWE-775): [#def131]
gpgme-1.23.2-build/gpgme-1.23.2/src/posix-io.c: scope_hint: In function '_gpgme_io_spawn'
gpgme-1.23.2-build/gpgme-1.23.2/src/posix-io.c:648:38: warning[-Wanalyzer-fd-leak]: leak of file descriptor 'open("/dev/null", 2)'
# 646| }
# 647| /* Make sure that the process has connected stdin. */
# 648|-> if (! seen_stdin && fd != 0)
# 649| {
# 650| if (dup2 (fd, 0) == -1)
Error: GCC_ANALYZER_WARNING (CWE-775): [#def132]
gpgme-1.23.2-build/gpgme-1.23.2/src/posix-io.c:650:22: warning[-Wanalyzer-fd-leak]: leak of file descriptor 'dup2(open("/dev/null", 2), 0)'
# 648| if (! seen_stdin && fd != 0)
# 649| {
# 650|-> if (dup2 (fd, 0) == -1)
# 651| _exit (8);
# 652| }
Error: GCC_ANALYZER_WARNING: [#def133]
gpgme-1.23.2-build/gpgme-1.23.2/src/posix-io.c:650:23: warning[-Wanalyzer-fd-use-without-check]: 'dup2' on possibly invalid file descriptor '0'
# 648| if (! seen_stdin && fd != 0)
# 649| {
# 650|-> if (dup2 (fd, 0) == -1)
# 651| _exit (8);
# 652| }
Error: GCC_ANALYZER_WARNING (CWE-775): [#def134]
gpgme-1.23.2-build/gpgme-1.23.2/src/posix-io.c:655:22: warning[-Wanalyzer-fd-leak]: leak of file descriptor 'dup2(open("/dev/null", 2), 1)'
# 653| if (! seen_stdout && fd != 1)
# 654| {
# 655|-> if (dup2 (fd, 1) == -1)
# 656| _exit (8);
# 657| }
Error: GCC_ANALYZER_WARNING: [#def135]
gpgme-1.23.2-build/gpgme-1.23.2/src/posix-io.c:655:23: warning[-Wanalyzer-fd-use-without-check]: 'dup2' on possibly invalid file descriptor '1'
# 653| if (! seen_stdout && fd != 1)
# 654| {
# 655|-> if (dup2 (fd, 1) == -1)
# 656| _exit (8);
# 657| }
Error: GCC_ANALYZER_WARNING (CWE-775): [#def136]
gpgme-1.23.2-build/gpgme-1.23.2/src/posix-io.c:660:22: warning[-Wanalyzer-fd-leak]: leak of file descriptor 'dup2(open("/dev/null", 2), 2)'
# 658| if (! seen_stderr && fd != 2)
# 659| {
# 660|-> if (dup2 (fd, 2) == -1)
# 661| _exit (8);
# 662| }
Error: CPPCHECK_WARNING: [#def137]
gpgme-1.23.2-build/gpgme-1.23.2/src/queryswdb.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CPPCHECK_WARNING: [#def138]
gpgme-1.23.2-build/gpgme-1.23.2/src/revsig.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CLANG_WARNING: [#def139]
gpgme-1.23.2-build/gpgme-1.23.2/src/revsig.c:160:3: warning[deadcode.DeadStores]: Value stored to 'opd' is never read
# 158| err = _gpgme_op_data_lookup (ctx, OPDATA_REVSIG, &hook, sizeof (*opd),
# 159| NULL);
# 160|-> opd = hook;
# 161| if (err)
# 162| return err;
Error: CPPCHECK_WARNING: [#def140]
gpgme-1.23.2-build/gpgme-1.23.2/src/setexpire.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CLANG_WARNING: [#def141]
gpgme-1.23.2-build/gpgme-1.23.2/src/setexpire.c:151:3: warning[deadcode.DeadStores]: Value stored to 'opd' is never read
# 149| err = _gpgme_op_data_lookup (ctx, OPDATA_SETEXPIRE, &hook, sizeof (*opd),
# 150| NULL);
# 151|-> opd = hook;
# 152| if (err)
# 153| return err;
Error: GCC_ANALYZER_WARNING (CWE-401): [#def142]
gpgme-1.23.2-build/gpgme-1.23.2/src/sign.c: scope_hint: In function 'parse_sig_created'
gpgme-1.23.2-build/gpgme-1.23.2/src/sign.c:205:12: warning[-Wanalyzer-malloc-leak]: leak of '<unknown>'
# 203| sig = malloc (sizeof (*sig));
# 204| if (!sig)
# 205|-> return gpg_error_from_syserror ();
# 206|
# 207| sig->next = NULL;
Error: GCC_ANALYZER_WARNING (CWE-401): [#def143]
gpgme-1.23.2-build/gpgme-1.23.2/src/sign.c:205:12: warning[-Wanalyzer-malloc-leak]: leak of 'sig'
# 203| sig = malloc (sizeof (*sig));
# 204| if (!sig)
# 205|-> return gpg_error_from_syserror ();
# 206|
# 207| sig->next = NULL;
Error: GCC_ANALYZER_WARNING (CWE-787): [#def144]
gpgme-1.23.2-build/gpgme-1.23.2/src/signers.c: scope_hint: In function 'gpgme_signers_add'
gpgme-1.23.2-build/gpgme-1.23.2/src/signers.c:85:19: warning[-Wanalyzer-out-of-bounds]: buffer overflow
# 83| return TRACE_ERR (gpg_error_from_syserror ());
# 84| for (j = ctx->signers_size; j < n; j++)
# 85|-> newarr[j] = NULL;
# 86| ctx->signers = newarr;
# 87| ctx->signers_size = n;
Error: CLANG_WARNING: [#def145]
gpgme-1.23.2-build/gpgme-1.23.2/src/tofupolicy.c:141:3: warning[deadcode.DeadStores]: Value stored to 'opd' is never read
# 139| err = _gpgme_op_data_lookup (ctx, OPDATA_TOFU_POLICY, &hook,
# 140| sizeof (*opd), NULL);
# 141|-> opd = hook;
# 142| if (err)
# 143| return err;
Error: CLANG_WARNING: [#def146]
gpgme-1.23.2-build/gpgme-1.23.2/src/trustlist.c:192:3: warning[deadcode.DeadStores]: Value stored to 'opd' is never read
# 190| err = _gpgme_op_data_lookup (ctx, OPDATA_TRUSTLIST, &hook,
# 191| sizeof (*opd), NULL);
# 192|-> opd = hook;
# 193| if (err)
# 194| return TRACE_ERR (err);
Error: GCC_ANALYZER_WARNING (CWE-401): [#def147]
gpgme-1.23.2-build/gpgme-1.23.2/src/verify.c: scope_hint: In function 'parse_valid_sig'
gpgme-1.23.2-build/gpgme-1.23.2/src/verify.c:429:6: warning[-Wanalyzer-malloc-leak]: leak of '*sig.fpr'
# 427| free (sig->fpr);
# 428| sig->fpr = strdup (args);
# 429|-> if (!sig->fpr)
# 430| return gpg_error_from_syserror ();
# 431|
Error: GCC_ANALYZER_WARNING (CWE-688): [#def148]
gpgme-1.23.2-build/gpgme-1.23.2/src/verify.c:433:9: warning[-Wanalyzer-null-argument]: use of NULL 'end' where non-null expected
<built-in>: note: argument 1 of '__builtin_strchr' must be non-null
# 431|
# 432| /* Skip the creation date. */
# 433|-> end = strchr (end, ' ');
# 434| if (end)
# 435| {
Error: CLANG_WARNING: [#def149]
gpgme-1.23.2-build/gpgme-1.23.2/src/verify.c:433:9: warning[core.NonNullParamChecker]: Null pointer passed to 1st parameter expecting 'nonnull'
# 431|
# 432| /* Skip the creation date. */
# 433|-> end = strchr (end, ' ');
# 434| if (end)
# 435| {
Error: CLANG_WARNING: [#def150]
gpgme-1.23.2-build/gpgme-1.23.2/src/verify.c:480:5: warning[deadcode.DeadStores]: Value stored to 'end' is never read
# 478| if (errno || end == tail || *tail != ' ')
# 479| return trace_gpg_error (GPG_ERR_INV_ENGINE);
# 480|-> end = tail;
# 481| }
# 482| }
Error: CLANG_WARNING: [#def151]
gpgme-1.23.2-build/gpgme-1.23.2/src/verify.c:556:4: warning[deadcode.DeadStores]: Value stored to 'lastp' is never read
# 554| while (notation && notation->next)
# 555| {
# 556|-> lastp = ¬ation->next;
# 557| notation = notation->next;
# 558| }
Error: CLANG_WARNING: [#def152]
gpgme-1.23.2-build/gpgme-1.23.2/src/verify.c:589:4: warning[deadcode.DeadStores]: Value stored to 'lastp' is never read
# 587| while (notation && notation->next)
# 588| {
# 589|-> lastp = ¬ation->next;
# 590| notation = notation->next;
# 591| }
Error: GCC_ANALYZER_WARNING (CWE-401): [#def153]
gpgme-1.23.2-build/gpgme-1.23.2/src/verify.c: scope_hint: In function 'parse_tofu_user'
gpgme-1.23.2-build/gpgme-1.23.2/src/verify.c:757:10: warning[-Wanalyzer-malloc-leak]: leak of 'fpr'
# 755| free (fpr);
# 756| free (address);
# 757|-> return err;
# 758| }
# 759|
Error: GCC_ANALYZER_WARNING (CWE-401): [#def154]
gpgme-1.23.2-build/gpgme-1.23.2/src/verify.c: scope_hint: In function '_gpgme_verify_status_handler'
gpgme-1.23.2-build/gpgme-1.23.2/src/verify.c:1014:24: warning[-Wanalyzer-malloc-leak]: leak of '*sig.pka_address'
# 1012| if (end)
# 1013| *end = 0;
# 1014|-> sig->pka_address = strdup (args);
# 1015| break;
# 1016|
Error: GCC_ANALYZER_WARNING (CWE-476): [#def155]
gpgme-1.23.2-build/gpgme-1.23.2/src/verify.c: scope_hint: In function 'gpgme_get_sig_key'
gpgme-1.23.2-build/gpgme-1.23.2/src/verify.c:1239:7: warning[-Wanalyzer-null-dereference]: dereference of NULL '0'
gpgme-1.23.2-build/gpgme-1.23.2/src/verify.c:32: included_from: Included from here.
gpgme-1.23.2-build/gpgme-1.23.2/src/verify.c:100:7: note: in expansion of macro 'TRACE_SUC'
# 1237|
# 1238| result = gpgme_op_verify_result (ctx);
# 1239|-> sig = result->signatures;
# 1240|
# 1241| while (sig && idx)
Error: GCC_ANALYZER_WARNING (CWE-476): [#def156]
gpgme-1.23.2-build/gpgme-1.23.2/src/verify.c: scope_hint: In function 'gpgme_get_sig_status'
gpgme-1.23.2-build/gpgme-1.23.2/src/verify.c:1265:7: warning[-Wanalyzer-null-dereference]: dereference of NULL '0'
gpgme-1.23.2-build/gpgme-1.23.2/src/verify.c:100:7: note: in expansion of macro 'TRACE_SUC'
# 1263|
# 1264| result = gpgme_op_verify_result (ctx);
# 1265|-> sig = result->signatures;
# 1266|
# 1267| while (sig && idx)
Error: GCC_ANALYZER_WARNING (CWE-476): [#def157]
gpgme-1.23.2-build/gpgme-1.23.2/src/verify.c: scope_hint: In function 'gpgme_get_sig_ulong_attr'
gpgme-1.23.2-build/gpgme-1.23.2/src/verify.c:1328:7: warning[-Wanalyzer-null-dereference]: dereference of NULL '0'
gpgme-1.23.2-build/gpgme-1.23.2/src/verify.c:100:7: note: in expansion of macro 'TRACE_SUC'
# 1326|
# 1327| result = gpgme_op_verify_result (ctx);
# 1328|-> sig = result->signatures;
# 1329|
# 1330| while (sig && idx)
Error: GCC_ANALYZER_WARNING (CWE-476): [#def158]
gpgme-1.23.2-build/gpgme-1.23.2/src/verify.c: scope_hint: In function 'gpgme_get_sig_string_attr'
gpgme-1.23.2-build/gpgme-1.23.2/src/verify.c:1392:7: warning[-Wanalyzer-null-dereference]: dereference of NULL '0'
gpgme-1.23.2-build/gpgme-1.23.2/src/verify.c:100:7: note: in expansion of macro 'TRACE_SUC'
# 1390|
# 1391| result = gpgme_op_verify_result (ctx);
# 1392|-> sig = result->signatures;
# 1393|
# 1394| while (sig && idx)
Error: CLANG_WARNING: [#def159]
gpgme-1.23.2-build/gpgme-1.23.2/src/vfs-create.c:133:18: warning[core.NullDereference]: Array access (from variable 'recp') results in a null pointer dereference
# 131|
# 132| i = 0;
# 133|-> while (!err && recp[i])
# 134| {
# 135| if (!recp[i]->subkeys || !recp[i]->subkeys->fpr)
Error: CLANG_WARNING: [#def160]
gpgme-1.23.2-build/gpgme-1.23.2/src/vfs-mount.c:107:3: warning[deadcode.DeadStores]: Value stored to 'opd' is never read
# 105| err = _gpgme_op_data_lookup (ctx, OPDATA_VFS_MOUNT, &hook, sizeof (*opd),
# 106| NULL);
# 107|-> opd = hook;
# 108| if (err)
# 109| return err;
Error: CLANG_WARNING: [#def161]
gpgme-1.23.2-build/gpgme-1.23.2/src/wait.c:139:3: warning[unix.Malloc]: Potential leak of memory pointed to by 'item'
# 137| }
# 138|
# 139|-> TRACE (DEBUG_CTX, "_gpgme_add_io_cb", ctx,
# 140| "fd=%d, dir=%d -> tag=%p", fd, dir, tag);
# 141|
Error: GCC_ANALYZER_WARNING (CWE-401): [#def162]
gpgme-1.23.2-build/gpgme-1.23.2/src/wait.c: scope_hint: In function '_gpgme_add_io_cb'
gpgme-1.23.2-build/gpgme-1.23.2/src/wait.c:142:10: warning[-Wanalyzer-malloc-leak]: leak of 'item'
gpgme-1.23.2-build/gpgme-1.23.2/src/wait.c:27: included_from: Included from here.
gpgme-1.23.2-build/gpgme-1.23.2/src/wait.c:40: included_from: Included from here.
gpgme-1.23.2-build/gpgme-1.23.2/src/wait.c:139:3: note: in expansion of macro 'TRACE'
# 140| "fd=%d, dir=%d -> tag=%p", fd, dir, tag);
# 141|
# 142|-> *r_tag = tag;
# 143| return 0;
# 144| }
Error: CPPCHECK_WARNING: [#def163]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-cancel.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CPPCHECK_WARNING: [#def164]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-decrypt-verify.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CPPCHECK_WARNING: [#def165]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-edit-sign.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CPPCHECK_WARNING: [#def166]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-edit.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CPPCHECK_WARNING: [#def167]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-encrypt-large.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CPPCHECK_WARNING: [#def168]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-encrypt-mixed.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CPPCHECK_WARNING: [#def169]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-encrypt-sign.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CPPCHECK_WARNING: [#def170]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-encrypt-sym.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CPPCHECK_WARNING: [#def171]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-eventloop.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CPPCHECK_WARNING: [#def172]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-file-name.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CPPCHECK_WARNING: [#def173]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-genkey.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CPPCHECK_WARNING: [#def174]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-gpgconf.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CPPCHECK_WARNING: [#def175]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-import.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: GCC_ANALYZER_WARNING (CWE-401): [#def176]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-import.c:230:9: warning[-Wanalyzer-malloc-leak]: leak of ‘make_filename("pubkey-1.asc")’
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-support.h:206:3: note: in expansion of macro ‘fail_if_err’
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-import.c:228:3: note: in expansion of macro ‘fail_if_err’
# 228| fail_if_err (err);
# 229|
# 230|-> err = gpgme_set_ctx_flag (ctx, "key-origin", "wkd,https://openpgpkey.gnupg.org");
# 231| fail_if_err (err);
# 232|
Error: GCC_ANALYZER_WARNING (CWE-401): [#def177]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-import.c:230:9: warning[-Wanalyzer-malloc-leak]: leak of ‘make_filename("seckey-1.asc")’
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-support.h:206:3: note: in expansion of macro ‘fail_if_err’
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-import.c:228:3: note: in expansion of macro ‘fail_if_err’
# 228| fail_if_err (err);
# 229|
# 230|-> err = gpgme_set_ctx_flag (ctx, "key-origin", "wkd,https://openpgpkey.gnupg.org");
# 231| fail_if_err (err);
# 232|
Error: CPPCHECK_WARNING: [#def178]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-keylist-secret-sig.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CLANG_WARNING: [#def179]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-keylist-secret-sig.c:366:39: warning[core.NullDereference]: Access to field 'comment' results in a dereference of a null pointer (loaded from field 'uids')
# 364| }
# 365| if (keys[i].uid[0].comment
# 366|-> && strcmp (keys[i].uid[0].comment, key->uids->comment))
# 367| {
# 368| fprintf (stderr, "Unexpected comment in first user ID: %s\n",
Error: CLANG_WARNING: [#def180]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-keylist-secret-sig.c:373:37: warning[core.NullDereference]: Access to field 'email' results in a dereference of a null pointer (loaded from field 'uids')
# 371| }
# 372| if (keys[i].uid[0].email
# 373|-> && strcmp (keys[i].uid[0].email, key->uids->email))
# 374| {
# 375| fprintf (stderr, "Unexpected email in first user ID: %s\n",
Error: CLANG_WARNING: [#def181]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-keylist-secret-sig.c:384:38: warning[core.NullDereference]: Access to field 'signatures' results in a dereference of a null pointer (loaded from field 'uids')
# 382| exit (1);
# 383| }
# 384|-> if (keys[i].uid[0].sig.algo != key->uids->signatures->pubkey_algo)
# 385| {
# 386| fprintf (stderr, "Unexpected algorithm in first user ID sig: %s\n",
Error: CPPCHECK_WARNING: [#def182]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-keylist-sig.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CLANG_WARNING: [#def183]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-keylist-sig.c:366:39: warning[core.NullDereference]: Access to field 'comment' results in a dereference of a null pointer (loaded from field 'uids')
# 364| }
# 365| if (keys[i].uid[0].comment
# 366|-> && strcmp (keys[i].uid[0].comment, key->uids->comment))
# 367| {
# 368| fprintf (stderr, "Unexpected comment in first user ID: %s\n",
Error: CLANG_WARNING: [#def184]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-keylist-sig.c:373:37: warning[core.NullDereference]: Access to field 'email' results in a dereference of a null pointer (loaded from field 'uids')
# 371| }
# 372| if (keys[i].uid[0].email
# 373|-> && strcmp (keys[i].uid[0].email, key->uids->email))
# 374| {
# 375| fprintf (stderr, "Unexpected email in first user ID: %s\n",
Error: CLANG_WARNING: [#def185]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-keylist-sig.c:384:38: warning[core.NullDereference]: Access to field 'signatures' results in a dereference of a null pointer (loaded from field 'uids')
# 382| exit (1);
# 383| }
# 384|-> if (keys[i].uid[0].sig.algo != key->uids->signatures->pubkey_algo)
# 385| {
# 386| fprintf (stderr, "Unexpected algorithm in first user ID sig: %s\n",
Error: CPPCHECK_WARNING: [#def186]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-keylist.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CLANG_WARNING: [#def187]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-keylist.c:326:11: warning[core.NullDereference]: Access to field 'revoked' results in a dereference of a null pointer (loaded from field 'next')
# 324|
# 325| /* Secondary key. */
# 326|-> if (key->subkeys->next->revoked)
# 327| {
# 328| fprintf (stderr, "Secondary key unexpectedly revoked\n");
Error: CLANG_WARNING: [#def188]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-keylist.c:453:39: warning[core.NullDereference]: Access to field 'comment' results in a dereference of a null pointer (loaded from field 'uids')
# 451| }
# 452| if (keys[i].uid[0].comment
# 453|-> && strcmp (keys[i].uid[0].comment, key->uids->comment))
# 454| {
# 455| fprintf (stderr, "Unexpected comment in first user ID: %s\n",
Error: CLANG_WARNING: [#def189]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-keylist.c:460:37: warning[core.NullDereference]: Access to field 'email' results in a dereference of a null pointer (loaded from field 'uids')
# 458| }
# 459| if (keys[i].uid[0].email
# 460|-> && strcmp (keys[i].uid[0].email, key->uids->email))
# 461| {
# 462| fprintf (stderr, "Unexpected email in first user ID: %s\n",
Error: CLANG_WARNING: [#def190]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-keylist.c:489:36: warning[core.NullDereference]: Access to field 'next' results in a dereference of a null pointer (loaded from field 'uids')
# 487| }
# 488| if (keys[i].uid[1].name
# 489|-> && strcmp (keys[i].uid[1].name, key->uids->next->name))
# 490| {
# 491| fprintf (stderr, "Unexpected name in second user ID: %s\n",
Error: CLANG_WARNING: [#def191]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-keylist.c:496:39: warning[core.NullDereference]: Access to field 'comment' results in a dereference of a null pointer (loaded from field 'next')
# 494| }
# 495| if (keys[i].uid[1].comment
# 496|-> && strcmp (keys[i].uid[1].comment, key->uids->next->comment))
# 497| {
# 498| fprintf (stderr, "Unexpected comment in second user ID: %s\n",
Error: CLANG_WARNING: [#def192]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-keylist.c:496:39: warning[core.NullDereference]: Access to field 'next' results in a dereference of a null pointer (loaded from field 'uids')
# 494| }
# 495| if (keys[i].uid[1].comment
# 496|-> && strcmp (keys[i].uid[1].comment, key->uids->next->comment))
# 497| {
# 498| fprintf (stderr, "Unexpected comment in second user ID: %s\n",
Error: CLANG_WARNING: [#def193]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-keylist.c:503:37: warning[core.NullDereference]: Access to field 'email' results in a dereference of a null pointer (loaded from field 'next')
# 501| }
# 502| if (keys[i].uid[1].email
# 503|-> && strcmp (keys[i].uid[1].email, key->uids->next->email))
# 504| {
# 505| fprintf (stderr, "Unexpected email in second user ID: %s\n",
Error: CLANG_WARNING: [#def194]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-keylist.c:503:37: warning[core.NullDereference]: Access to field 'next' results in a dereference of a null pointer (loaded from field 'uids')
# 501| }
# 502| if (keys[i].uid[1].email
# 503|-> && strcmp (keys[i].uid[1].email, key->uids->next->email))
# 504| {
# 505| fprintf (stderr, "Unexpected email in second user ID: %s\n",
Error: CPPCHECK_WARNING: [#def195]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-sig-notation.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CPPCHECK_WARNING: [#def196]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-sign.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CPPCHECK_WARNING: [#def197]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-signers.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: GCC_ANALYZER_WARNING (CWE-401): [#def198]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-decrypt.c:36: included_from: Included from here.
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-decrypt.c: scope_hint: In function ‘main’
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-support.h:46:10: warning[-Wanalyzer-malloc-leak]: leak of ‘make_filename("cipher-1.asc")’
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-decrypt.c:55:3: note: in expansion of macro ‘fail_if_err’
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-support.h:206:3: note: in expansion of macro ‘fail_if_err’
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-decrypt.c:55:3: note: in expansion of macro ‘fail_if_err’
# 44| do \
# 45| { \
# 46|-> if (err) \
# 47| { \
# 48| fprintf (stderr, "%s:%d: %s: %s\n", \
Error: GCC_ANALYZER_WARNING (CWE-401): [#def199]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-decrypt-verify.c:36: included_from: Included from here.
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-decrypt-verify.c: scope_hint: In function ‘main’
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-support.h:46:10: warning[-Wanalyzer-malloc-leak]: leak of ‘make_filename("cipher-2.asc")’
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-decrypt-verify.c:125:3: note: in expansion of macro ‘fail_if_err’
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-support.h:206:3: note: in expansion of macro ‘fail_if_err’
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-decrypt-verify.c:125:3: note: in expansion of macro ‘fail_if_err’
# 44| do \
# 45| { \
# 46|-> if (err) \
# 47| { \
# 48| fprintf (stderr, "%s:%d: %s: %s\n", \
Error: GCC_ANALYZER_WARNING (CWE-401): [#def200]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-import.c:35: included_from: Included from here.
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-import.c: scope_hint: In function ‘main’
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-support.h:46:10: warning[-Wanalyzer-malloc-leak]: leak of ‘make_filename("pubkey-1.asc")’
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-import.c:228:3: note: in expansion of macro ‘fail_if_err’
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-support.h:206:3: note: in expansion of macro ‘fail_if_err’
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-import.c:228:3: note: in expansion of macro ‘fail_if_err’
# 44| do \
# 45| { \
# 46|-> if (err) \
# 47| { \
# 48| fprintf (stderr, "%s:%d: %s: %s\n", \
Error: GCC_ANALYZER_WARNING (CWE-401): [#def201]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-support.h:46:10: warning[-Wanalyzer-malloc-leak]: leak of ‘make_filename("seckey-1.asc")’
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-import.c:228:3: note: in expansion of macro ‘fail_if_err’
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-support.h:206:3: note: in expansion of macro ‘fail_if_err’
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-import.c:228:3: note: in expansion of macro ‘fail_if_err’
# 44| do \
# 45| { \
# 46|-> if (err) \
# 47| { \
# 48| fprintf (stderr, "%s:%d: %s: %s\n", \
Error: COMPILER_WARNING: [#def202]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-support.h: scope_hint: In function 'check_data.constprop'
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-support.h:137:12: warning[-Wstringop-overflow=]: writing 1 byte into a region of size 0
# 137 | buf[ret] = 0;
# | ^
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-support.h:114:8: note: at offset [-2147483648, -1] into destination object 'buf' of size 513
# 114 | char buf[BUF_SIZE + 1];
# | ^
# 135| if ((ret = gpgme_data_read (dh, buf, BUF_SIZE)) < 0)
# 136| fail_if_err (gpgme_err_code_from_errno (errno));
# 137|-> buf[ret] = 0;
# 138| if (ret != expectedlen || strncmp (buf, expected, expectedlen))
# 139| {
Error: CLANG_WARNING: [#def203]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-thread-keylist-verify.c:64:12: warning[deadcode.DeadStores]: Although the value stored to 'err' is used in the enclosing expression, the value is never actually read from 'err'
# 62| fail_if_err (err);
# 63|
# 64|-> while (!(err = gpgme_op_keylist_next (ctx, &key)))
# 65| {
# 66| gpgme_key_unref (key);
Error: CLANG_WARNING: [#def204]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-thread-keylist.c:52:12: warning[deadcode.DeadStores]: Although the value stored to 'err' is used in the enclosing expression, the value is never actually read from 'err'
# 50| fail_if_err (err);
# 51|
# 52|-> while (!(err = gpgme_op_keylist_next (ctx, &key)))
# 53| {
# 54| gpgme_key_unref (key);
Error: CPPCHECK_WARNING: [#def205]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-thread1.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: GCC_ANALYZER_WARNING (CWE-401): [#def206]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-thread1.c:115:9: warning[-Wanalyzer-malloc-leak]: leak of ‘make_filename("cipher-1.asc")’
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-support.h:206:3: note: in expansion of macro ‘fail_if_err’
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-thread1.c:112:7: note: in expansion of macro ‘fail_if_err’
# 113|
# 114| if (!(agent_info && strchr (agent_info, ':')))
# 115|-> gpgme_set_passphrase_cb (ctx, passphrase_cb, NULL);
# 116|
# 117| err = gpgme_data_new_from_file (&in, cipher_1_asc, 1);
Error: CPPCHECK_WARNING: [#def207]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpg/t-verify.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CPPCHECK_WARNING: [#def208]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpgsm/cms-decrypt.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CPPCHECK_WARNING: [#def209]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpgsm/cms-keylist.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CPPCHECK_WARNING: [#def210]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpgsm/t-import.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: GCC_ANALYZER_WARNING (CWE-401): [#def211]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpgsm/t-import.c:155:3: warning[-Wanalyzer-malloc-leak]: leak of ‘make_filename("cert_dfn_pca15.der")’
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpgsm/t-support.h:122:3: note: in expansion of macro ‘fail_if_err’
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpgsm/t-import.c:153:3: note: in expansion of macro ‘fail_if_err’
# 153| fail_if_err (err);
# 154|
# 155|-> gpgme_set_protocol (ctx, GPGME_PROTOCOL_CMS);
# 156|
# 157| err = gpgme_data_new_from_file (&in, cert_1, 1);
Error: CPPCHECK_WARNING: [#def212]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpgsm/t-keylist.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: GCC_ANALYZER_WARNING (CWE-465): [#def213]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpgsm/t-keylist.c: scope_hint: In function ‘main’
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpgsm/t-keylist.c:214:10: warning[-Wanalyzer-deref-before-check]: check of ‘*key.subkeys’ for NULL after already dereferencing it
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpgsm/t-keylist.c:34: included_from: Included from here.
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpgsm/t-support.h:122:3: note: in expansion of macro ‘fail_if_err’
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpgsm/t-keylist.c:95:3: note: in expansion of macro ‘fail_if_err’
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpgsm/t-keylist.c:99:3: note: in expansion of macro ‘fail_if_err’
# 212| exit (1);
# 213| }
# 214|-> if (!key->subkeys || key->subkeys->next)
# 215| {
# 216| fprintf (stderr, "Key has unexpected number of subkeys\n");
Error: CPPCHECK_WARNING: [#def214]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpgsm/t-sign.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: GCC_ANALYZER_WARNING (CWE-401): [#def215]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpgsm/t-import.c:35: included_from: Included from here.
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpgsm/t-import.c: scope_hint: In function ‘main’
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpgsm/t-support.h:36:10: warning[-Wanalyzer-malloc-leak]: leak of ‘make_filename("cert_dfn_pca01.der")’
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpgsm/t-import.c:153:3: note: in expansion of macro ‘fail_if_err’
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpgsm/t-support.h:122:3: note: in expansion of macro ‘fail_if_err’
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpgsm/t-import.c:153:3: note: in expansion of macro ‘fail_if_err’
# 34| do \
# 35| { \
# 36|-> if (err) \
# 37| { \
# 38| fprintf (stderr, "%s:%d: %s: %s (%d.%d)\n", \
Error: GCC_ANALYZER_WARNING (CWE-401): [#def216]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpgsm/t-support.h:36:10: warning[-Wanalyzer-malloc-leak]: leak of ‘make_filename("cert_dfn_pca15.der")’
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpgsm/t-import.c:153:3: note: in expansion of macro ‘fail_if_err’
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpgsm/t-support.h:122:3: note: in expansion of macro ‘fail_if_err’
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpgsm/t-import.c:153:3: note: in expansion of macro ‘fail_if_err’
# 34| do \
# 35| { \
# 36|-> if (err) \
# 37| { \
# 38| fprintf (stderr, "%s:%d: %s: %s (%d.%d)\n", \
Error: CPPCHECK_WARNING: [#def217]
gpgme-1.23.2-build/gpgme-1.23.2/tests/gpgsm/t-verify.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CPPCHECK_WARNING: [#def218]
gpgme-1.23.2-build/gpgme-1.23.2/tests/json/t-json.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CLANG_WARNING: [#def219]
gpgme-1.23.2-build/gpgme-1.23.2/tests/json/t-json.c:221:23: warning[core.NullDereference]: Access to field 'type' results in a dereference of a null pointer (loaded from variable 'hay')
# 219|
# 220| /* Type check. This automatically checks bool vals and NULL */
# 221|-> if (needle->type != hay->type)
# 222| {
# 223| if (verbose)
Error: CPPCHECK_WARNING: [#def220]
gpgme-1.23.2-build/gpgme-1.23.2/tests/run-decrypt.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CPPCHECK_WARNING: [#def221]
gpgme-1.23.2-build/gpgme-1.23.2/tests/run-encrypt.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CLANG_WARNING: [#def222]
gpgme-1.23.2-build/gpgme-1.23.2/tests/run-encrypt.c:257:17: warning[unix.Malloc]: Potential leak of memory pointed to by 'keystring'
# 255| show_usage (1);
# 256| keystring = xstrdup (*argv);
# 257|-> for (i=0; keystring[i]; i++)
# 258| if (keystring[i] == ';')
# 259| keystring[i] = '\n';
Error: CPPCHECK_WARNING: [#def223]
gpgme-1.23.2-build/gpgme-1.23.2/tests/run-export.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CPPCHECK_WARNING: [#def224]
gpgme-1.23.2-build/gpgme-1.23.2/tests/run-genkey.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CLANG_WARNING: [#def225]
gpgme-1.23.2-build/gpgme-1.23.2/tests/run-genkey.c:502:15: warning[unix.Malloc]: Potential leak of memory pointed to by 'subfprs'
# 500| else if (setexpire)
# 501| {
# 502|-> err = gpgme_op_setexpire (ctx, akey, expire, subfprs, 0);
# 503| if (err)
# 504| {
Error: CPPCHECK_WARNING: [#def226]
gpgme-1.23.2-build/gpgme-1.23.2/tests/run-identify.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CLANG_WARNING: [#def227]
gpgme-1.23.2-build/gpgme-1.23.2/tests/run-identify.c:44:15: warning[deadcode.DeadStores]: Value stored to 's' during its initialization is never read
# 42| data_type_to_string (gpgme_data_type_t dt)
# 43| {
# 44|-> const char *s = "[?]";
# 45|
# 46| switch (dt)
Error: CPPCHECK_WARNING: [#def228]
gpgme-1.23.2-build/gpgme-1.23.2/tests/run-import.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: GCC_ANALYZER_WARNING (CWE-401): [#def229]
gpgme-1.23.2-build/gpgme-1.23.2/tests/run-import.c: scope_hint: In function ‘main’
gpgme-1.23.2-build/gpgme-1.23.2/tests/run-import.c:115:23: warning[-Wanalyzer-malloc-leak]: leak of ‘import_filter’
# 113| show_usage (1);
# 114| import_filter = strdup (*argv);
# 115|-> argc--; argv++;
# 116| }
# 117| else if (!strcmp (*argv, "--key-origin"))
Error: CLANG_WARNING: [#def230]
gpgme-1.23.2-build/gpgme-1.23.2/tests/run-import.c:148:11: warning[unix.Malloc]: Potential leak of memory pointed to by 'import_filter'
# 146| if (import_filter)
# 147| {
# 148|-> err = gpgme_set_ctx_flag (ctx, "import-filter", import_filter);
# 149| fail_if_err (err);
# 150| }
Error: CLANG_WARNING: [#def231]
gpgme-1.23.2-build/gpgme-1.23.2/tests/run-import.c:153:11: warning[unix.Malloc]: Potential leak of memory pointed to by 'key_origin'
# 151| if (key_origin)
# 152| {
# 153|-> err = gpgme_set_ctx_flag (ctx, "key-origin", key_origin);
# 154| fail_if_err (err);
# 155| }
Error: CPPCHECK_WARNING: [#def232]
gpgme-1.23.2-build/gpgme-1.23.2/tests/run-keylist.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CLANG_WARNING: [#def233]
gpgme-1.23.2-build/gpgme-1.23.2/tests/run-keylist.c:254:11: warning[unix.Malloc]: Potential leak of memory pointed to by 'trust_model'
# 252| show_usage (1);
# 253| trust_model = strdup (*argv);
# 254|-> argc--; argv++;
# 255| }
# 256| else if (!strncmp (*argv, "--", 2))
Error: GCC_ANALYZER_WARNING (CWE-401): [#def234]
gpgme-1.23.2-build/gpgme-1.23.2/tests/run-keylist.c: scope_hint: In function ‘main’
gpgme-1.23.2-build/gpgme-1.23.2/tests/run-keylist.c:254:23: warning[-Wanalyzer-malloc-leak]: leak of ‘trust_model’
# 252| show_usage (1);
# 253| trust_model = strdup (*argv);
# 254|-> argc--; argv++;
# 255| }
# 256| else if (!strncmp (*argv, "--", 2))
Error: CPPCHECK_WARNING: [#def235]
gpgme-1.23.2-build/gpgme-1.23.2/tests/run-keysign.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CPPCHECK_WARNING: [#def236]
gpgme-1.23.2-build/gpgme-1.23.2/tests/run-receive-keys.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CPPCHECK_WARNING: [#def237]
gpgme-1.23.2-build/gpgme-1.23.2/tests/run-sign.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CPPCHECK_WARNING: [#def238]
gpgme-1.23.2-build/gpgme-1.23.2/tests/run-swdb.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CPPCHECK_WARNING: [#def239]
gpgme-1.23.2-build/gpgme-1.23.2/tests/run-threaded.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: GCC_ANALYZER_WARNING (CWE-476): [#def240]
gpgme-1.23.2-build/gpgme-1.23.2/tests/run-threaded.c: scope_hint: In function ‘random_data_new’
gpgme-1.23.2-build/gpgme-1.23.2/tests/run-threaded.c:288:11: warning[-Wanalyzer-possible-null-dereference]: dereference of possibly-NULL ‘ret’
gpgme-1.23.2-build/gpgme-1.23.2/tests/run-threaded.c:43: included_from: Included from here.
gpgme-1.23.2-build/gpgme-1.23.2/tests/run-support.h:40:11: note: in definition of macro ‘fail_if_err’
gpgme-1.23.2-build/gpgme-1.23.2/tests/run-threaded.c:571:3: note: in expansion of macro ‘fail_if_err’
# 286| int data_rand;
# 287|
# 288|-> ret->fd = -1;
# 289|
# 290| if (data_type)
Error: GCC_ANALYZER_WARNING (CWE-401): [#def241]
gpgme-1.23.2-build/gpgme-1.23.2/tests/run-threaded.c: scope_hint: In function ‘import’
gpgme-1.23.2-build/gpgme-1.23.2/tests/run-threaded.c:290:7: warning[-Wanalyzer-malloc-leak]: leak of ‘random_data_new(fname)’
gpgme-1.23.2-build/gpgme-1.23.2/tests/run-support.h:40:11: note: in definition of macro ‘fail_if_err’
gpgme-1.23.2-build/gpgme-1.23.2/tests/run-threaded.c:571:3: note: in expansion of macro ‘fail_if_err’
# 288| ret->fd = -1;
# 289|
# 290|-> if (data_type)
# 291| {
# 292| data_rand = data_type;
Error: GCC_ANALYZER_WARNING (CWE-476): [#def242]
gpgme-1.23.2-build/gpgme-1.23.2/tests/run-threaded.c: scope_hint: In function ‘main’
gpgme-1.23.2-build/gpgme-1.23.2/tests/run-threaded.c:762:25: warning[-Wanalyzer-possible-null-dereference]: dereference of possibly-NULL ‘msg_it’
# 760| msg_it = msg_it->next;
# 761| }
# 762|-> msg_it->file_name = *argv;
# 763| argc--; argv++;
# 764| }
Error: CLANG_WARNING: [#def243]
gpgme-1.23.2-build/gpgme-1.23.2/tests/run-threaded.c:797:10: warning[unix.Malloc]: Potential leak of memory pointed to by 'msg_it'
# 795| while (--repeats != 0);
# 796|
# 797|-> return 0;
# 798| }
Error: CPPCHECK_WARNING: [#def244]
gpgme-1.23.2-build/gpgme-1.23.2/tests/run-tofu.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: CPPCHECK_WARNING: [#def245]
gpgme-1.23.2-build/gpgme-1.23.2/tests/run-verify.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Error: GCC_ANALYZER_WARNING (CWE-775): [#def246]
gpgme-1.23.2-build/gpgme-1.23.2/tests/run-verify.c: scope_hint: In function ‘main’
gpgme-1.23.2-build/gpgme-1.23.2/tests/run-verify.c:391:24: warning[-Wanalyzer-file-leak]: leak of FILE ‘fopen(*argv, "rb")’
gpgme-1.23.2-build/gpgme-1.23.2/tests/run-verify.c:36: included_from: Included from here.
gpgme-1.23.2-build/gpgme-1.23.2/tests/run-support.h:142:3: note: in expansion of macro ‘fail_if_err’
# 389| if (argc > 1)
# 390| {
# 391|-> fp_msg = fopen (argv[1], "rb");
# 392| if (!fp_msg)
# 393| {
Error: GCC_ANALYZER_WARNING (CWE-401): [#def247]
gpgme-1.23.2-build/gpgme-1.23.2/tests/run-verify.c:391:24: warning[-Wanalyzer-malloc-leak]: leak of ‘fopen(*argv, "rb")’
gpgme-1.23.2-build/gpgme-1.23.2/tests/run-support.h:142:3: note: in expansion of macro ‘fail_if_err’
# 389| if (argc > 1)
# 390| {
# 391|-> fp_msg = fopen (argv[1], "rb");
# 392| if (!fp_msg)
# 393| {
Error: GCC_ANALYZER_WARNING (CWE-401): [#def248]
gpgme-1.23.2-build/gpgme-1.23.2/tests/t-data.c:37:31: warning[-Wanalyzer-malloc-leak]: leak of ‘make_filename("t-data-1.txt")’
gpgme-1.23.2-build/gpgme-1.23.2/tests/t-data.c:264:7: note: in expansion of macro ‘fail_if_err’
gpgme-1.23.2-build/gpgme-1.23.2/tests/t-data.c:264:7: note: in expansion of macro ‘fail_if_err’
# 35|
# 36| #undef fail_if_err
# 37|-> #define fail_if_err(a) do { if(a) { \
# 38| fprintf (stderr, "%s:%d: (%i) gpgme_error_t " \
# 39| "%s\n", __FILE__, __LINE__, round, \
Error: GCC_ANALYZER_WARNING (CWE-401): [#def249]
gpgme-1.23.2-build/gpgme-1.23.2/tests/t-data.c:37:31: warning[-Wanalyzer-malloc-leak]: leak of ‘make_filename("t-data-2.txt")’
gpgme-1.23.2-build/gpgme-1.23.2/tests/t-data.c:264:7: note: in expansion of macro ‘fail_if_err’
gpgme-1.23.2-build/gpgme-1.23.2/tests/t-data.c:264:7: note: in expansion of macro ‘fail_if_err’
# 35|
# 36| #undef fail_if_err
# 37|-> #define fail_if_err(a) do { if(a) { \
# 38| fprintf (stderr, "%s:%d: (%i) gpgme_error_t " \
# 39| "%s\n", __FILE__, __LINE__, round, \
Error: GCC_ANALYZER_WARNING (CWE-401): [#def250]
gpgme-1.23.2-build/gpgme-1.23.2/tests/t-data.c:195:14: warning[-Wanalyzer-malloc-leak]: leak of ‘make_filename("t-data-1.txt")’
# 193| case TEST_INVALID_ARGUMENT:
# 194| err = gpgme_data_new (NULL);
# 195|-> if (!err)
# 196| {
# 197| fprintf (stderr, "%s:%d: gpgme_data_new on NULL pointer succeeded "
Error: GCC_ANALYZER_WARNING (CWE-401): [#def251]
gpgme-1.23.2-build/gpgme-1.23.2/tests/t-data.c: scope_hint: In function ‘main’
gpgme-1.23.2-build/gpgme-1.23.2/tests/t-data.c:195:14: warning[-Wanalyzer-malloc-leak]: leak of ‘make_filename("t-data-2.txt")’
gpgme-1.23.2-build/gpgme-1.23.2/tests/t-data.c:34: included_from: Included from here.
# 193| case TEST_INVALID_ARGUMENT:
# 194| err = gpgme_data_new (NULL);
# 195|-> if (!err)
# 196| {
# 197| fprintf (stderr, "%s:%d: gpgme_data_new on NULL pointer succeeded "
Error: GCC_ANALYZER_WARNING (CWE-401): [#def252]
gpgme-1.23.2-build/gpgme-1.23.2/tests/t-data.c:216:14: warning[-Wanalyzer-malloc-leak]: leak of ‘make_filename("t-data-1.txt")’
# 214| case TEST_INOUT_MEM_FROM_INEXISTANT_FILE:
# 215| err = gpgme_data_new_from_file (&data, missing_filename, 1);
# 216|-> if (!err)
# 217| {
# 218| fprintf (stderr, "%s:%d: gpgme_data_new_from_file on inexistant "
Error: GCC_ANALYZER_WARNING (CWE-401): [#def253]
gpgme-1.23.2-build/gpgme-1.23.2/tests/t-data.c:216:14: warning[-Wanalyzer-malloc-leak]: leak of ‘make_filename("t-data-2.txt")’
# 214| case TEST_INOUT_MEM_FROM_INEXISTANT_FILE:
# 215| err = gpgme_data_new_from_file (&data, missing_filename, 1);
# 216|-> if (!err)
# 217| {
# 218| fprintf (stderr, "%s:%d: gpgme_data_new_from_file on inexistant "
Error: GCC_ANALYZER_WARNING (CWE-401): [#def254]
gpgme-1.23.2-build/gpgme-1.23.2/tests/t-data.c:237:14: warning[-Wanalyzer-malloc-leak]: leak of ‘make_filename("t-data-1.txt")’
# 235| err = gpgme_data_new_from_filepart (&data, missing_filename, 0,
# 236| strlen (text), strlen (text));
# 237|-> if (!err)
# 238| {
# 239| fprintf (stderr, "%s:%d: gpgme_data_new_from_file on inexistant "
Error: GCC_ANALYZER_WARNING (CWE-401): [#def255]
gpgme-1.23.2-build/gpgme-1.23.2/tests/t-data.c:237:14: warning[-Wanalyzer-malloc-leak]: leak of ‘make_filename("t-data-2.txt")’
# 235| err = gpgme_data_new_from_filepart (&data, missing_filename, 0,
# 236| strlen (text), strlen (text));
# 237|-> if (!err)
# 238| {
# 239| fprintf (stderr, "%s:%d: gpgme_data_new_from_file on inexistant "
Error: GCC_ANALYZER_WARNING (CWE-401): [#def256]
gpgme-1.23.2-build/gpgme-1.23.2/tests/t-data.c:247:16: warning[-Wanalyzer-malloc-leak]: leak of ‘make_filename("t-data-1.txt")’
# 245| {
# 246| FILE *fp = fopen (longer_text_filename, "rb");
# 247|-> if (! fp)
# 248| {
# 249| fprintf (stderr, "%s:%d: fopen: %s\n", __FILE__, __LINE__,
Error: GCC_ANALYZER_WARNING (CWE-401): [#def257]
gpgme-1.23.2-build/gpgme-1.23.2/tests/t-data.c:247:16: warning[-Wanalyzer-malloc-leak]: leak of ‘make_filename("t-data-2.txt")’
# 245| {
# 246| FILE *fp = fopen (longer_text_filename, "rb");
# 247|-> if (! fp)
# 248| {
# 249| fprintf (stderr, "%s:%d: fopen: %s\n", __FILE__, __LINE__,
Error: CPPCHECK_WARNING: [#def258]
gpgme-1.23.2-build/gpgme-1.23.2/tests/t-engine-info.c: information[normalCheckLevelMaxBranches]: Limiting analysis of branches. Use --check-level=exhaustive to analyze all branches.
Scan Properties
| analyzer-version-clang | 18.1.7 |
| analyzer-version-cppcheck | 2.14.2 |
| analyzer-version-gcc | 14.1.1 |
| analyzer-version-gcc-analyzer | 14.1.1 |
| analyzer-version-shellcheck | 0.10.0 |
| enabled-plugins | clang, cppcheck, gcc, shellcheck |
| exit-code | 0 |
| host | ip-172-16-1-9.us-west-2.compute.internal |
| mock-config | fedora-41-x86_64 |
| project-name | gpgme-1.23.2-4.fc41 |
| store-results-to | /tmp/tmpwkqdmqfr/gpgme-1.23.2-4.fc41.tar.xz |
| time-created | 2024-07-03 13:59:52 |
| time-finished | 2024-07-03 14:42:37 |
| tool | csmock |
| tool-args | '/usr/bin/csmock' '-r' 'fedora-41-x86_64' '-t' 'cppcheck,gcc,clang,shellcheck' '-o' '/tmp/tmpwkqdmqfr/gpgme-1.23.2-4.fc41.tar.xz' '--gcc-analyze' '/tmp/tmpwkqdmqfr/gpgme-1.23.2-4.fc41.src.rpm' |
| tool-version | csmock-3.5.3-1.el9 |